The DOI matches its Crossref record.
Li+ Ion Insertion in TiO2 (Anatase). 2. Voltammetry on Nanoporous Films
Open accessAbstract
Electrochemical properties of Li + ion insertion in nanoporous TiO 2 (anatase) electrodes were studied by voltammetry. Linear and cyclic potential scans were recorded as a function of electrolyte concentration, film thickness, and temperature. The currents were directly proportional to the inner electrode area of the electrodes. The reduction of Ti 4+ and oxidation of Ti 3+ are sluggish and follows irreversible kinetics. The standard rate constant was (3.5 ± 0.5) × 10 -10 cm/s. The transfer coefficient was close to 0.5, indicating that the potential drop appears mainly across the Helmholtz layer. The capacitive currents govern largely the shape of the i − v curves, except within a region near the peak potential where diffusion-limited insertion and extraction of Li + ions in the anatase lattice are dominating. The diffusion coefficient at 25 °C in the nanoporous structure was approximately 2 × 10 -17 cm 2 /s for insertion and 4 × 10 -17 cm 2 /s for extraction. The activation energy was 0.4 eV for insertion and 0.5 eV for extraction. The maximum obtained mole fraction of Li + in Li x TiO 2 was x = 0.47.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Achieving high energy density and high power density with pseudocapacitive materials
Choi, C., Ashby, D. S., Butts, D. M., DeBlock, R. H., Wei, Q., Lau, J., & Dunn, B. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0142-z · Cited by 1,964
V2O5-Anchored Carbon Nanotubes for Enhanced Electrochemical Energy Storage
Sathiya, M., Prakash, A. S., Ramesha, K., Tarascon, J., & Shukla, A. K. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207285b · Cited by 1,019
Supercapacitors as next generation energy storage devices: Properties and applications
Olabi, A. G., Abbas, Q., Al Makky, A., & Abdelkareem, M. A. (2022) · Energy · doi:10.1016/j.energy.2022.123617 · Cited by 960
Hu, M., Li, Z., Hu, T., Zhu, S., Zhang, C., & Wang, X. (2016) · ACS Nano · doi:10.1021/acsnano.6b06597 · Cited by 555
Retracted
Metadata
- Authors
- Lindström, H., Södergren, S., Solbrand, A., Rensmo, H., Hjelm, J., Hagfeldt, A., & Lindquist, S.-E.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-09-01
- Volume
- 101
- Issue
- 39
- Pages
- 7717-7722
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W1987494872
- Cited by
- 1,669
- References
- 0
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Li+ Ion Insertion in TiO2 (Anatase). 2. Voltammetry on Nanoporous Films. https://app.cochat.ai/papers/10.1021/jp970490q
- The paper
- Lindström, H., Södergren, S., Solbrand, A., Rensmo, H., Hjelm, J., Hagfeldt, A., & Lindquist, S.-E. (1997). Li+ Ion Insertion in TiO2 (Anatase). 2. Voltammetry on Nanoporous Films. The Journal of Physical Chemistry B. https://doi.org/10.1021/jp970490q
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
