Dye-Sensitized Nanostructured p-Type Nickel Oxide Film as a Photocathode for a Solar Cell

Abstract

Nanostructured NiO film was prepared by depositing nickel hydroxide slurry on conducting glass and sintering at 500 °C to a thickness of about 1 μm. The photocurrent−voltage (IV) characteristics of the plain nanostructured NiO electrode recorded potentiostatically in a standard three-electrode setup upon UV illumination demonstrate p-type behavior, while the IV characteristics of a dye-sensitized nanostructured NiO electrode coated with erythrosin B show cathodic photocurrent under visible light illumination. The highest incident photon-to-current conversion efficiencies of tetrakis(4-carboxyphenyl)porphyrin (TPPC) and erythrosin B-coated NiO films were 0.24% and 3.44%, respectively. In sandwich solar cells with a platinized conducting glass as counter electrode exposed to light from a sun simulator (light intensity: 68 mW/cm 2 ), a short-circuit cathodic photocurrent density ( I SC ) of 0.079 mA/cm 2 and an open-circuit voltage ( V OC ) of 98.5 mV for TPPC-coated NiO electrode were achieved. Similarly, I SC = 0.232 mA/cm 2 and V OC = 82.8 mV were registered when the NiO electrode was coated with erythrosin B. The cathodic photocurrent is explained by hole injection from dye molecule to the valence band of the p-NiO electrode.