The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanical Stability and Porosity Analysis of Large-Pore SBA-15 Mesoporous Molecular Sieves by Mercury Porosimetry and Organics Adsorption
Abstract
The mechanical stability of SBA-15 mesoporous silicas has been assessed using powder X-ray diffraction; nitrogen, benzene, and n -heptane adsorption; and mercury porosimetry. SBA-15 was found to possess rather low mechanical stability as compared to other mesoporous materials, viz., MCM-41 and MCM-48. These results can be explained by a simple mechanical model, which shows that SBA-15 has an unfavorable ratio between pore diameter and wall thickness. This ratio is more favorable for MCM-41 despite its smaller wall thickness. Our study confirmed that SBA-15 contains a significant amount of micropores in addition to the hexagonal arrangement of large mesopores. The amount (represented by the additional pore volume and surface area) of these complementary pores is tunable by variation of the synthesis temperature. It was shown that SBA-15 synthesized at temperatures higher than 120 °C contains almost no micropores. However, the pore size distribution of these materials is broader compared to materials synthesized at a lower temperature. The observed structural properties of the different SBA-15 materials are attributed to the changes in the degree of penetration of the poly(ethylene oxide) chains of the triblock copolymer within the silica walls of SBA-15.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characterization of the porous structure of sba-15
Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R. (2000) · Chemistry of Materials · doi:10.1021/cm000164e · Cited by 1,409
Cited by
Ordered Mesoporous Materials for Bioadsorption and Biocatalysis
Hartmann, M. (2005) · Chemistry of Materials · doi:10.1021/cm0485658 · Cited by 1,117
Self-citationRecent advances in the textural characterization of hierarchically structured nanoporous materials
Cychosz, K. A., Guillet-Nicolas, R., García-Martínez, J., & Thommes, M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00391e · Cited by 1,060
Nanoarchitectonics for Mesoporous Materials
Ariga, K., Vinu, A., Yamauchi, Y., Ji, Q., & Hill, J. P. (2012) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20110162 · Cited by 727
Self-citationPreparation and Characterization of Well‐Ordered Hexagonal Mesoporous Carbon Nitride
Vinu, A., Ariga, K., Mori, T., Nakanishi, T., Hishita, S., Golberg, D., & Bando, Y. (2005) · Advanced Materials · doi:10.1002/adma.200401643 · Cited by 536
Self-citationSchlumberger, C., & Thommes, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202002181 · Cited by 536
Metadata
- Authors
- Hartmann, M., & Vinu, A.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-09-17
- Volume
- 18
- Issue
- 21
- Pages
- 8010-8016
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2024219513
- Cited by
- 235
- References
- 1
- FWCI
- 7.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical Stability and Porosity Analysis of Large-Pore SBA-15 Mesoporous Molecular Sieves by Mercury Porosimetry and Organics Adsorption. https://app.cochat.ai/papers/10.1021/la025782j
- The paper
- Hartmann, M., & Vinu, A. (2002). Mechanical Stability and Porosity Analysis of Large-Pore SBA-15 Mesoporous Molecular Sieves by Mercury Porosimetry and Organics Adsorption. Langmuir. https://doi.org/10.1021/la025782j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.