The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The Effects of Molecular Weight and Temperature on the Kinetic Friction of Silicone Rubbers
Abstract
The frictional stresses of poly(dimethylsiloxane) elastomers of various molecular weights were measured against a supported monolayer of hexadecylsiloxane and a thin film of polystyrene as a function of sliding velocity and temperature. On both surfaces, friction decreases with molecular weight, but increases with sliding velocity, reaches a maximum, and thereafter it decreases or displays a plateau. While the velocity corresponding to the maximum shear stress is nearly independent of the molecular weight of the polymer, it differs between the two substrates. These results are consistent with the models proposed earlier by Schallamach as well as by Chernyak and Leonov, according to which the detachment force per load-bearing chain increases with velocity while the number of chains supporting the total frictional load decreases with velocity and molecular weight. From the temperature-dependent studies, the activation energy of friction on both surfaces is estimated to be ∼25 kJ/mol, which is larger than the activation energy of viscous flow of silicone fluids, but compares well with the values obtained from recent studies of melt dynamics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chaudhury, M. K., & Whitesides, G. M. (1991) · Langmuir · doi:10.1021/la00053a033 · Cited by 658
Self-citation
Cited by
Contact mechanics for randomly rough surfaces
Persson, B. N. J. (2006) · Surface Science Reports · doi:10.1016/j.surfrep.2006.04.001 · Cited by 759
Designing durable icephobic surfaces
Golovin, K., Kobaku, S. P. R., Lee, D. H., DiLoreto, E. T., Mabry, J. M., & Tuteja, A. (2016) · Science Advances · doi:10.1126/sciadv.1501496 · Cited by 686
Friction and lubrication of hydrogels—its richness and complexity
Gong, J. P. (2006) · Soft Matter · doi:10.1039/b603209p · Cited by 462
Solid friction from stick–slip down to pinning and aging
Baumberger, T., & Caroli, C. (2006) · Advances in Physics · doi:10.1080/00018730600732186 · Cited by 430
Finger pad friction and its role in grip and touch
Adams, M. J., Johnson, S. A., Lefèvre, P., Lévesque, V., Hayward, V., André, T., & Thonnard, J.-L. (2013) · Journal of The Royal Society Interface · doi:10.1098/rsif.2012.0467 · Cited by 293
Metadata
- Authors
- Vorvolakos, K., & Chaudhury, M. K.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-07-01
- Volume
- 19
- Issue
- 17
- Pages
- 6778-6787
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W1993333032
- Cited by
- 163
- References
- 1
- FWCI
- 14.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.