The DOI matches its Crossref record.
Water Adsorption in Carbon-Slit Nanopores
Abstract
With the use of the grand canonical Monte Carlo simulation, water adsorption isotherms were determined for SPC/E water in slit-shaped graphitic nanopores at 298 K. The pore widths considered were 0.6, 0.625, 0.7, 0.8, 1.0, 1.6, and 2.0 nm. The resulting adsorption isotherms indicated negligible adsorption at low pressures, pore-filling by a capillary-condensation-like mechanism, and adsorption/desorption hysteresis loops. For pore widths equal to or larger than 0.7 nm, the relative pressure at which pore filling occurs and the size of the hysteresis loop decrease with decreasing pore width. For 0.6-nm pores, pore filling occurs at pressures approaching saturation. Upon decreasing the pore width from 2.0 to 0.7 nm, the zero-coverage isosteric heat of adsorption increases from 6 to 14 kJ/mol. The limit at high coverage converges to the enthalpy of condensation for SPC/E water as the pore width increases. From the simulated adsorbed-water densities and distributions across the pores and the use of a mean-field approximation, the solvation force was computed between two flat hydrophobic walls. The force profile oscillates as a function of the wall-to-wall separation. Our results show that attractive peaks of the force correspond to wall-to-wall separations at which confined water molecules cannot establish a finite number of layers, while repulsive peaks correspond to separations at which confined water molecules form well-defined layers of molecules, often stabilized by intralayer hydrogen bonds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Capillary condensation of adsorbates in porous materials
Horikawa, T., Do, D. D., & Nicholson, D. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.08.003 · Cited by 478
Water adsorption on carbon - A review
Liu, L., Tan, S. (., Horikawa, T., Do, D. D., Nicholson, D., & Liu, J. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.10.002 · Cited by 366
Water distribution characteristic and effect on methane adsorption capacity in shale clay
Li, J., Li, X., Wang, X., Li, Y., Wu, K., Shi, J., Yang, L., Feng, D., Zhang, T., & Yu, P. (2016) · International Journal of Coal Geology · doi:10.1016/j.coal.2016.03.012 · Cited by 337
Molecular Structure and Dynamics in Thin Water Films at the Silica and Graphite Surfaces
Argyris, D., Tummala, N. R., Striolo, A., & Cole, D. R. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp803234a · Cited by 263
Self-citationPhase Transitions Induced by Nanoconfinement in Liquid Water
Giovambattista, N., Rossky, P. J., & Debenedetti, P. G. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.050603 · Cited by 253
Striolo, A., Chialvo, A. A., Gubbins, K. E., & Cummings, P. T. (2005) · The Journal of Chemical Physics · doi:10.1063/1.1924697 · Cited by 252
Self-citationMolecular simulation of water confined in nanoporous silica
Bonnaud, P. A., Coasne, B., & Pellenq, R. J.-M. (2010) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/22/28/284110 · Cited by 182
Influence of Water Vapor on CO2 Adsorption Using a Biomass-Based Carbon
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500342q · Cited by 41
Metadata
- Authors
- Striolo, A., Chialvo, A. A., Cummings, P. T., & Gubbins, K. E.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-09-01
- Volume
- 19
- Issue
- 20
- Pages
- 8583-8591
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2035382897
- Cited by
- 232
- References
- 0
- FWCI
- 3.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.