Synthesis of Microtubes with a Surface of “House of Cards” Structure via Needlelike Particles and Control of Their Pore Size
The DOI matches its Crossref record.
Abstract
The conditions for synthesizing microtubes with a surface of "house of cards" structure via needlelike particles were examined in detail. Magnesium carbonate trihydrate was formed as a metastable phase in the reaction process using magnesium hydroxide and carbon dioxide as starting materials. Subsequently, in the formation of basic magnesium carbonate from magnesium carbonate trihydrate, microtubes with a surface of house of cards structure were obtained via needlelike particles of magnesium carbonate trihydrate under certain conditions where the temperature and added amount of sodium hydroxide were properly controlled. The pore size of the microtubes could be controlled within a range of 0.5-6 microm by adjusting the condition of needlelike particle formation. In addition, the sustainability of naphthalene release from the microtube was found to be about 6 times higher than that from naphthalene crystal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Temperature- and pH-Dependent Morphology and FT−IR Analysis of Magnesium Carbonate Hydrates
Zhang, Z., Zheng, Y., Ni, Y., Liu, Z., Chen, J., & Liang, X. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp061261j · Cited by 285
Magnesium-based cements for CO2 capture and utilisation
Morrison, J., Jauffret, G., Galvez-Martos, J. L., & Glasser, F. P. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.12.016 · Cited by 105
Directed precipitation of hydrated and anhydrous magnesium carbonates for carbon storage
Swanson, E. J., Fricker, K. J., Sun, M., & Park, A.-H. A. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp03491k · Cited by 101
Nguyen, H., Santos, H., Sreenivasan, H., Kunther, W., Carvelli, V., Illikainen, M., & Kinnunen, P. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106696 · Cited by 77
Gadikota, G., Fricker, K., Jang, S.-H., & Park, A.-H. A. (2015) · ACS Symposium Series · doi:10.1021/bk-2015-1194.ch012 · Cited by 54
Precipitation of nesquehonite from homogeneous supersaturated solutions
Cheng, W., & Li, Z. (2009) · Crystal Research and Technology · doi:10.1002/crat.200900286 · Cited by 46
The kinetics of CO2 indirect mineralization of MgSO 4 to produce MgCO 3 · 3 H 2 O
Geng, X., Lv, L., Li, C., Zhang, T., Liang, B., Chen, Y., & Tang, S. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.04.017 · Cited by 30
Synthesis and characterization of amorphous magnesium carbonate nanoparticles
Yang, J., Han, Y., Luo, J., Leifer, K., Strømme, M., & Welch, K. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.12.037 · Cited by 27
The regulating mechanism of MgCO3·3H2O whisker growth orientation with the presence of SDS
Geng, X., Lv, L., Zhang, T., & Tang, S. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101307 · Cited by 27
Metadata
- Authors
- Mitsuhashi, K., Tagami, N., Tanabe, K., Ohkubo, T., Sakai, H., Koishi, M., & Abe, M.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-03-18
- Volume
- 21
- Issue
- 8
- Pages
- 3659-3663
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2083583635
- Cited by
- 80
- References
- 0
- FWCI
- 1.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.