The DOI matches its Crossref record.
Photovoltaic Cells Based on Sequentially Adsorbed Multilayers of Conjugated Poly(p-phenylene ethynylene)s and a Water-Soluble Fullerene Derivative
Abstract
We describe the layer-by-layer (LBL) fabrication of multilayer films and photovoltaic cells using poly(phenylene ethynylene)-based anionic conjugated polyelectrolytes as electron donors and water-soluble cationic fullerene C60 derivatives as acceptors. LBL film deposition was found to be linearly related to the number of bilayers as monitored by UV-vis absorption. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) of the multilayer films revealed an aggregated but relatively uniform morphology devoid of any long-range phase separation. The maximum incident monochromatic photon to current conversion efficiency (IPCE) of the photovoltaic cells was 5.5%, the highest efficiency reported to date for cells fabricated by using the LBL fabrication technique, and since the thin film cells do not provide complete absorption of the incident light, the current generation per photon absorbed may be as much as 10%. The cells exhibited open circuit voltages of 200-250 mV with highest measured short circuit currents up to 0.5 mA/cm2 and fill factors around 30%. The power conversion efficiencies measured at AM 1.5 solar conditions (100 mW/cm2) varied between 0.01 and 0.04%, and similar to the IPCE results, the efficiency is a function of the thickness of the PV active layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ariga, K., Hill, J. P., & Ji, Q. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b700410a · Cited by 1,256
Conjugated Polyelectrolytes: Synthesis, Photophysics, and Applications
Jiang, H., Taranekar, P., Reynolds, J. R., & Schanze, K. S. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200805456 · Cited by 734
Self-citationDuan, C., Zhang, K., Zhong, C., Huang, F., & Cao, Y. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60200a · Cited by 487
Recent Applications of Conjugated Polyelectrolytes in Optoelectronic Devices
Hoven, C. V., Garcia, A., Bazan, G. C., & Nguyen, T. (2008) · Advanced Materials · doi:10.1002/adma.200800533 · Cited by 373
Review: Fullerene based acceptors for efficient bulk heterojunction organic solar cell applications
Ganesamoorthy, R., Sathiyan, G., & Sakthivel, P. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.11.024 · Cited by 323
Electrochemically enabled polyelectrolyte multilayer devices: from fuel cells to sensors
Lutkenhaus, J. L., & Hammond, P. T. (2007) · Soft Matter · doi:10.1039/b701203a · Cited by 264
Yuan, W. Z., Hu, R., Lam, J. W. Y., Xie, N., Jim, C. K. W., & Tang, B. Z. (2012) · Chemistry – A European Journal · doi:10.1002/chem.201103151 · Cited by 62
Metadata
- Authors
- Mwaura, J. K., Pinto, M. R., Witker, D., Ananthakrishnan, N., Schanze, K. S., & Reynolds, J. R.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-05-18
- Volume
- 21
- Issue
- 22
- Pages
- 10119-10126
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2071342824
- Cited by
- 185
- References
- 0
- FWCI
- 13.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.