The DOI matches its Crossref record.
Oil-Loaded Monolinolein-Based Particles with Confined Inverse Discontinuous Cubic Structure (Fd 3 m)
Abstract
In our recent work, we reported on the effect of varying temperature and solubilizing tetradecane (TC) on the structural transitions observed in dispersed particles based on the monolinolein (MLO)-water-TC system. At a given temperature, the addition of TC induces a transition of the internal structure from the bicontinuous cubic phase, Pn3m, to the reversed hexagonal, H2, and to the isotropic liquid phase (water-in-oil (W/O) microemulsions). Our present study focuses on the discovery of a Fd3m phase (reversed discontinuous micellar cubic), which is formed in the MLO-water-TC system at a specific TC/MLO weight ratio. It is situated between the H2 and the isotropic liquid phase (W/O microemulsion). Remarkably, it is not found in the absence of TC by increasing the temperature. The Fd3m structure was investigated in detail by means of small-angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM). The present work proves that the structural transformation in the dispersed particles from H2 (hexosomes) to the W/O microemulsion system (emulsified microemulsion (EME)) is indirect and it occurs gradually via an emulsified intermediate phase. Specifically, in addition to the nanostructured aqueous dispersions described above, we present new TC-loaded aqueous dispersions with a confined intermediate phase, which is a discontinuous micellar cubic phase of the symmetry Fd3m. We denoted this type of emulsified particles as "micellar cubosomes".
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Kulkarni, C. V., Wachter, W., Iglesias-Salto, G., Engelskirchen, S., & Ahualli, S. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp01539c · Cited by 448
Delivery systems for liquid food products
Sagalowicz, L., & Leser, M. E. (2010) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2009.12.003 · Cited by 375
Self-citationCharacterization and potential applications of nanostructured aqueous dispersions
Yaghmur, A., & Glatter, O. (2009) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2008.07.007 · Cited by 373
Self-citationKuntsche, J., Horst, J. C., & Bunjes, H. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.02.001 · Cited by 363
Mulet, X., Boyd, B. J., & Drummond, C. J. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.10.014 · Cited by 315
Zhai, J., Fong, C., Tran, N., & Drummond, C. J. (2019) · ACS Nano · doi:10.1021/acsnano.8b07961 · Cited by 280
Monoglyceride self-assembly structures as delivery vehicles
Sagalowicz, L., Leser, M. E., Watzke, H. J., & Michel, M. (2006) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2005.12.012 · Cited by 262
Self-citation
Metadata
- Authors
- Yaghmur, A., de Campo, L., Salentinig, S., Sagalowicz, L., Leser, M. E., & Glatter, O.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-12-13
- Volume
- 22
- Issue
- 2
- Pages
- 517-521
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2007909389
- Cited by
- 164
- References
- 0
- FWCI
- 4.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.