Preparation of High Catalyst Utilization Electrodes for Polymer Electrolyte Fuel Cells
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
We have developed a novel preparation procedure for an electrocatalyst layer with high utilization of catalyst for polymer electrolyte fuel cells. A commercial Pt catalyst supported on high surface area carbon black (Pt/CB) and Nafion ionomer solution was heated in an autoclave at 200 degrees C, followed by quenching to form the ink of the mixture. It was found that the cathode prepared with the new catalyst ink exhibited very high performance, i.e., high catalyst utilization and improved gas diffusivity. The microstructure analysis indicated that the autoclave treatment promoted an effective introduction of Nafion ionomer into primary pores of Pt/CB agglomerates, in which ca. 90% of Pt catalysts were supported. It was clearly observed by scanning transmission electron microscopy that Nafion ionomer was distributed more uniformly inside Pt/CB agglomerates, compared with those simply mixed with a ball mill in a conventional manner.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhancement of the Electroreduction of Oxygen on Pt Alloys with Fe, Ni, and Co
Toda, T., Igarashi, H., Uchida, H., & Watanabe, M. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392544 · Cited by 1,336
Self-citationUchida, M., Fukuoka, Y., Sugawara, Y., Eda, N., & Ohta, A. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836988 · Cited by 309
Antolini, E., Passos, R. R., & Ticianelli, E. A. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00644-8 · Cited by 147
Cited by
Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC
Orfanidi, A., Rheinländer, P. J., Schulte, N., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1251814jes · Cited by 169
Andersen, S. M., & Grahl-Madsen, L. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.11.101 · Cited by 61
Performance enhancement of PEMFC through temperature control in catalyst layer fabrication
Park, H.-S., Cho, Y.-H., Cho, Y.-H., Jung, C. R., Jang, J. H., & Sung, Y.-E. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.07.046 · Cited by 46
Chisaka, M., Matsuoka, E., & Daiguji, H. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3439617 · Cited by 30
Ang, S.-Y., & Walsh, D. A. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.097 · Cited by 21
Metadata
- Authors
- Song, J. M., Suzuki, S., Uchida, H., & Watanabe, M.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-06-02
- Volume
- 22
- Issue
- 14
- Pages
- 6422-6428
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W1990257697
- Cited by
- 62
- References
- 3
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.