The DOI matches its Crossref record.
Synthesis of TiO2−PMMA Nanocomposite: Using Methacrylic Acid as a Coupling Agent
Abstract
Inorganic-polymer nanocomposites are of significant interest for emerging materials due to their improved properties and unique combination of properties. Methacrylic acid (MA), a functionalization agent that can chemically link TiO2 nanomaterials (n-TiO2) and polymer matrix, was used to modify the surface of n-TiO2 using a Ti-carboxylic coordination bond. Then, the double bond in MA was copolymerized with methyl methacrylate (MMA) to form a n-TiO2-PMMA nanocomposite. The resulting n-TiO2-PMMA nanocomposite materials were characterized by using thermal analysis, electron microscopy, and elemental analysis. The dynamic mechanical properties (Young's and shear modulus) were measured using an ultrasonic pulse technique. The electron microscopy results showed a good distribution of the nanofillers in the polymer matrix. The glass transition temperature, thermal degradation temperature, and dynamic elastic moduli of the nanocomposites were shown to increase with an increase in the weight percentage of nanofibers in the composite. The resulting nanocomposites exhibited improved elastic properties and have potential application in dental composites and bone cements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Chrissafis, K., & Bikiaris, D. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.06.010 · Cited by 561
High refractive index organic–inorganic nanocomposites: design, synthesis and application
Lü, C., & Yang, B. (2009) · Journal of Materials Chemistry · doi:10.1039/b816254a · Cited by 383
Simulation of interphase percolation and gradients in polymer nanocomposites
Qiao, R., & Catherine Brinson, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.11.022 · Cited by 283
Li, L., Chakrabarty, S., Spyrou, K., Ober, C. K., & Giannelis, E. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01506 · Cited by 126
Li, L., Chakrabarty, S., Jiang, J., Zhang, B., Ober, C., & Giannelis, E. P. (2016) · Nanoscale · doi:10.1039/c5nr07334k · Cited by 78
Metadata
- Authors
- Khaled, S. M., Sui, R., Charpentier, P. A., & Rizkalla, A. S.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-02-23
- Volume
- 23
- Issue
- 7
- Pages
- 3988-3995
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2089375074
- Cited by
- 222
- References
- 0
- FWCI
- 13.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.