The DOI matches its Crossref record.
Structural Evolution during Geopolymerization from an Early Age to Consolidated Material
Abstract
Time-resolved rheology, small angle X-ray scattering (SAXS), and electron paramagnetic resonance (EPR) techniques were used to study the polymerization of geopolymers. These polymers are inorganically synthesized by the alkaline activation of an aluminosilicate source (metakaolin) in aqueous solution. The influence of the alkali activator (Na(+), K(+), and Cs(+)) was investigated at room temperature. As observed through the variation of the viscoelastic moduli (G', G"), curing proceeds in steps that are well pronounced when NaOH is used. These steps correspond to a specific dissolution/polycondensation mechanism and are smoothed when the size of the alkali cations increases. This size effect also has an impact on the gelation time (maximum of tan δ). Structural analysis through SAXS experiments allows us to characterize these mechanisms on the nanoscale and to show that the growth of the geopolymer is due to the aggregation of oligomers with a size that is even smaller than the cation is chaotropic. Finally, water behavior during geopolymerization was assessed by using a spin probe. The results show that the spin-probe signal progressively disappears during the first moment of the reaction and reappears when the solid polymeric gel is formed, highlighting the role of water molecules in the different chemical reactions during the process. The EPR signal is in fact increasingly masked as the ion size decreases (because of the strength of the hydration shell). At the end of the reaction, some water molecules were released within the pores, restoring the visibility of the isotropic spin-probe signal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Geopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Yang, T., Zhu, H., Zhang, Z., Gao, X., Zhang, C., & Wu, Q. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.008 · Cited by 399
Ambient Temperature Drying Shrinkage and Cracking in Metakaolin‐Based Geopolymers
Kuenzel, C., Vandeperre, L. J., Donatello, S., Boccaccini, A. R., & Cheeseman, C. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05380.x · Cited by 291
Rheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 283
The interrelationship between surface chemistry and rheology in alkali activated slag paste
Kashani, A., Provis, J. L., Qiao, G. G., & van Deventer, J. S. J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.127 · Cited by 268
In situ X-ray pair distribution function analysis of geopolymer gel nanostructure formation kinetics
White, C. E., Provis, J. L., Bloomer, B., Henson, N. J., & Page, K. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp44342f · Cited by 67
Benefits of Sealed-Curing on Compressive Strength of Fly Ash-Based Geopolymers
Lee, S., Van Riessen, A., & Chon, C.-M. (2016) · Materials · doi:10.3390/ma9070598 · Cited by 49
Metadata
- Authors
- Steins, P., Poulesquen, A., Diat, O., & Frizon, F.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-05-18
- Volume
- 28
- Issue
- 22
- Pages
- 8502-8510
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2332011246
- Cited by
- 167
- References
- 0
- FWCI
- 18.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.