The DOI matches its Crossref record.
WO3 Nanolamella Gas Sensor: Porosity Control Using SnO2 Nanoparticles for Enhanced NO2 Sensing
Abstract
Tungsten trioxide (WO3) is one of the important multifunctional materials used for photocatalytic, photoelectrochemical, battery, and gas sensor applications. Nanostructured WO3 holds great potential for enhancing the performance of these applications. Here, we report highly sensitive NO2 sensors using WO3 nanolamellae and their sensitivity improvement by morphology control using SnO2 nanoparticles. WO3 nanolamellae were synthesized by an acidification method starting from Na2WO4 and H2SO4 and subsequent calcination at 300 °C. The lamellae were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), which clearly showed the formation of single-crystalline nanolamellae with a c-axis orientation. The stacking of each nanolamella to form larger lamellae that were 50-250 nm in lateral size and 15-25 nm in thickness was also revealed. From pore size distribution measurements, we found that introducing monodisperse SnO2 nanoparticles (ca. 4 nm) into WO3 lamella-based films improved their porosity, most likely because of effective insertion of nanoparticles into lamella stacks or in between assemblies of lamella stacks. In contrast, the crystallite size was not significantly changed, even by introducing SnO2. Because of the improvement in porosity, the composites of WO3 nanolamellae and SnO2 nanoparticles displayed enhanced sensitivity (sensor response) to NO2 at dilute concentrations of 20-1000 ppb in air, demonstrating the effectiveness of microstructure control of WO3 lamella-based films for highly sensitive NO2 detection. Electrical sensitization by SnO2 nanoparticles was also considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Graphene based metal and metal oxide nanocomposites: synthesis, properties and their applications
Khan, M., Tahir, M. N., Adil, S. F., Khan, H. U., Siddiqui, M. R. H., Al-warthan, A. A., & Tremel, W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02240a · Cited by 709
A review on WO3 based gas sensors: Morphology control and enhanced sensing properties
Dong, C., Zhao, R., Yao, L., Ran, Y., Zhang, X., & Wang, Y. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153194 · Cited by 434
Gas Sensors Based on Chemi-Resistive Hybrid Functional Nanomaterials
Jian, Y., Hu, W., Zhao, Z., Cheng, P., Haick, H., Yao, M., & Wu, W. (2020) · Nano-Micro Letters · doi:10.1007/s40820-020-0407-5 · Cited by 429
WO3-based photocatalysts: morphology control, activity enhancement and multifunctional applications
Dong, P., Hou, G., Xi, X., Shao, R., & Dong, F. (2017) · Environmental Science: Nano · doi:10.1039/c6en00478d · Cited by 361
Diversiform metal oxide-based hybrid nanostructures for gas sensing with versatile prospects
Zhang, D., Yang, Z., Yu, S., Mi, Q., & Pan, Q. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213272 · Cited by 347
Metadata
- Authors
- Kida, T., Nishiyama, A., Hua, Z., Suematsu, K., Yuasa, M., & Shimanoe, K.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-02-26
- Volume
- 30
- Issue
- 9
- Pages
- 2571-2579
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2329309199
- Cited by
- 174
- References
- 0
- FWCI
- 12.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: WO3 Nanolamella Gas Sensor: Porosity Control Using SnO2 Nanoparticles for Enhanced NO2 Sensing. https://app.cochat.ai/papers/10.1021/la4049105
- The paper
- Kida, T., Nishiyama, A., Hua, Z., Suematsu, K., Yuasa, M., & Shimanoe, K. (2014). WO3 Nanolamella Gas Sensor: Porosity Control Using SnO2 Nanoparticles for Enhanced NO2 Sensing. Langmuir. https://doi.org/10.1021/la4049105
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.