The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Validity of the t-plot Method to Assess Microporosity in Hierarchical Micro/Mesoporous Materials
Abstract
The t-plot method is a well-known technique which allows determining the micro- and/or mesoporous volumes and the specific surface area of a sample by comparison with a reference adsorption isotherm of a nonporous material having the same surface chemistry. In this paper, the validity of the t-plot method is discussed in the case of hierarchical porous materials exhibiting both micro- and mesoporosities. Different hierarchical zeolites with MCM-41 type ordered mesoporosity are prepared using pseudomorphic transformation. For comparison, we also consider simple mechanical mixtures of microporous and mesoporous materials. We first show an intrinsic failure of the t-plot method; this method does not describe the fact that, for a given surface chemistry and pressure, the thickness of the film adsorbed in micropores or small mesopores (< 10σ, σ being the diameter of the adsorbate) increases with decreasing the pore size (curvature effect). We further show that such an effect, which arises from the fact that the surface area and, hence, the free energy of the curved gas/liquid interface decreases with increasing the film thickness, is captured using the simple thermodynamical model by Derjaguin. The effect of such a drawback on the ability of the t-plot method to estimate the micro- and mesoporous volumes of hierarchical samples is then discussed, and an abacus is given to correct the underestimated microporous volume by the t-plot method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
de Gennes, P. G. (1985) · Reviews of Modern Physics · doi:10.1103/revmodphys.57.827 · Cited by 7,207
From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis
Corma, A. (1997) · Chemical Reviews · doi:10.1021/cr960406n · Cited by 5,791
Natural zeolites as effective adsorbents in water and wastewater treatment
Wang, S., & Peng, Y. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.10.029 · Cited by 2,441
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Stable single-unit-cell nanosheets of zeolite MFI as active and long-lived catalysts
Choi, M., Na, K., Kim, J., Sakamoto, Y., Terasaki, O., & Ryoo, R. (2009) · Nature · doi:10.1038/nature08288 · Cited by 2,237
Adsorption by Powders and Porous Solids
(1999) · Elsevier eBooks · doi:10.1016/b978-0-12-598920-6.x5000-3 · Cited by 1,819
Physical Adsorption on Non-Uniform Surfaces
Halsey, G. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746689 · Cited by 1,472
Weitkamp, J. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00632-9 · Cited by 973
Generation, Characterization, and Impact of Mesopores in Zeolite Catalysts
van Donk, S., Janssen, A. H., Bitter, J. H., & de Jong, K. P. (2003) · Catalysis Reviews · doi:10.1081/cr-120023908 · Cited by 852
Cited by
Hierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Schlumberger, C., & Thommes, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202002181 · Cited by 536
Verboekend, D., Nuttens, N., Locus, R., Van Aelst, J., Verolme, P., Groen, J. C., Pérez-Ramírez, J., & Sels, B. F. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00520e · Cited by 355
Metadata
- Authors
- Galarneau, A., Villemot, F., Rodriguez, J., Fajula, F., & Coasne, B.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-10-27
- Volume
- 30
- Issue
- 44
- Pages
- 13266-13274
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2315937415
- Cited by
- 356
- References
- 34
- FWCI
- 6.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Validity of the t-plot Method to Assess Microporosity in Hierarchical Micro/Mesoporous Materials. https://app.cochat.ai/papers/10.1021/la5026679
- The paper
- Galarneau, A., Villemot, F., Rodriguez, J., Fajula, F., & Coasne, B. (2014). Validity of the t-plot Method to Assess Microporosity in Hierarchical Micro/Mesoporous Materials. Langmuir. https://doi.org/10.1021/la5026679
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.