The DOI matches its Crossref record.
Adsorbent Helium Density Measurement and Its Effect on Adsorption Isotherms at High Pressure
Abstract
On the basis of an experimental study in a large temperature range, it is shown that “helium densities” of adsorbents measured at room temperature could be erroneous due to a non-negligible effect of helium adsorption. It is proposed that the density obtained with helium at high temperature, for instance, at the regeneration temperature of the adsorbent, be considered as the adsorbent density. Using the corrected densities of 3A, 4A, 5A, and 13X zeolites and of activated and graphitized carbons and of silica gel, we experimentally determined the adsorption of helium on the above mentioned adsorbents at room temperature and in a large pressure range up to 500 MPa. The shape of the adsorption isotherm reveals no saturation at high pressure. These experimental data are in agreement with Monte Carlo simulations of adsorption of a Lennard-Jones gas by a rigid plane as well as by a microporous rigid solid interface. We also examined implications of the new helium density of activated carbon for our previous measurements of adsorption at high pressure. The result is the disappearance of the inexplicable negative part of the isotherms and even a renewed increase in the curves at high pressure. Moreover, a comparison with Monte Carlo simulations of argon adsorption on microporous graphite is in good agreement with the shape of the adsorption curve at high pressure. Finally, the role of the microporous structure of adsorbents and of the gas−adsorbent interaction in adsorption at high pressure is discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Evaluating metal–organic frameworks for natural gas storage
Mason, J. A., Veenstra, M., & Long, J. R. (2014) · Chem. Sci. · doi:10.1039/c3sc52633j · Cited by 1,239
Nanoporous Polymers for Hydrogen Storage
Germain, J., Fréchet, J. M. J., & Svec, F. (2009) · Small · doi:10.1002/smll.200801762 · Cited by 432
Hydrogen Storage in Activated Carbons and Activated Carbon Fibers
de la Casa-Lillo, M. A., Lamari-Darkrim, F., Cazorla-Amorós, D., & Linares-Solano, A. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp014543m · Cited by 346
Impact of mass balance calculations on adsorption capacities in microporous shale gas reservoirs
Ross, D. J. K., & Marc Bustin, R. (2007) · Fuel · doi:10.1016/j.fuel.2007.02.036 · Cited by 306
Review of experimental sorption studies of CO2 and CH4 in shales
Klewiah, I., Berawala, D. S., Alexander Walker, H. C., Andersen, P. Ø., & Nadeau, P. H. (2020) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2019.103045 · Cited by 255
Net adsorption of gas/vapor mixtures in microporous solids
Talu, O. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4021382 · Cited by 33
Metadata
- Authors
- Malbrunot, P., Vidal, D., Vermesse, J., Chahine, R., & Bose, T. K.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-02-01
- Volume
- 13
- Issue
- 3
- Pages
- 539-544
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2024108554
- Cited by
- 178
- References
- 0
- FWCI
- 1.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.