The DOI matches its Crossref record.
Combinatorial Materials Science for Polymer Thin-Film Dewetting
Abstract
Combinatorial methods involving data collection in multiparameter space allow a rapid identification of measured property trends as a function of system parameters. The technique has been applied with success to pharmaceutical, inorganic and organic materials synthesis, but not significantly to measurements of polymeric films and coatings. We demonstrate the use of 2-D combinatorial libraries to investigate thin-film dewetting. We have prepared libraries of thin films of polystyrene on silicon substrates containing orthogonal, continuous variations of thickness ( h ), and temperature ( T ) that represent about 1200 practical state points per library. The libraries were screened for dewetting behavior using automated optical microscopy. Dewetting trends were visibly apparent on the libraries, and a comprehensive map of the T, h, and time ( t ) dependence was generated in a few hours. The combinatorial libraries, spanning a large T, h, and t range, not only reproduced known dewetting structures and phenomena but also enabled a novel T, h superposition of the heterogeneous nucleated hole dewetting kinetics. We observed three hole nucleation regimes as a function of thickness: heterogeneously nucleated holes ( h > 55 nm), a crossover regime where both heterogeneous and capillary instability nucleation compete (33 nm < h < 55 nm), and a regime of holes nucleated by capillary instability (16 nm < h < 33 nm).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A buckling-based metrology for measuring the elastic moduli of polymeric thin films
Stafford, C. M., Harrison, C., Beers, K. L., Karim, A., Amis, E. J., VanLandingham, M. R., Kim, H.-C., Volksen, W., Miller, R. D., & Simonyi, E. E. (2004) · Nature Materials · doi:10.1038/nmat1175 · Cited by 1,360
Self-citationCombinatorial and High‐Throughput Materials Science
Maier, W. F., Stöwe, K., & Sieg, S. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603675 · Cited by 401
Macroscopic Orientation of Block Copolymer Cylinders in Single‐Layer Films by Shearing
Angelescu, D. E., Waller, J. H., Adamson, D. H., Deshpande, P., Chou, S. Y., Register, R. A., & Chaikin, P. M. (2004) · Advanced Materials · doi:10.1002/adma.200400643 · Cited by 338
Washburn, N. R., Yamada, K. M., Simon, C. G., Kennedy, S. B., & Amis, E. J. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.043 · Cited by 309
Self-citationQSAR Models for the Analysis of Bioresponse Data from Combinatorial Libraries of Biomaterials
Smith, J. R., Kholodovych, V., Knight, D., Welsh, W. J., & Kohn, J. (2005) · QSAR & Combinatorial Science · doi:10.1002/qsar.200420062 · Cited by 39
Metadata
- Authors
- Meredith, J. C., Smith, A. P., Karim, A., & Amis, E. J.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-12-01
- Volume
- 33
- Issue
- 26
- Pages
- 9747-9756
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2047896862
- Cited by
- 229
- References
- 0
- FWCI
- 21.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.