The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Mechanical Behavior of Alumina/Poly(methyl methacrylate) Nanocomposites
Abstract
Alumina/poly(methyl methacrylate) (PMMA) nanocomposites were synthesized using 38 and 17 nm alumina nanoparticles. At an optimum weight fraction, the resulting nanocomposites display a room-temperature brittle-to-ductile transition in uniaxial tension with an increase in the strain-to-failure that averages 40% strain and the appearance of a well-defined yield point in uniaxial tension. Concurrently, the glass transition temperature ( T g ) of the nanocomposites drops by more than 20 °C. The brittle-to-ductile transition is found to depend on poor interfacial adhesion between polymer and nanoparticle. This allows the nucleation of voids, typically by larger particles (∼100 nm), which subsequently expand during loading. This void formation suppresses craze formation and promotes delocalized shear yielding. In addition, the reduction in T g shrinks the shear yield envelope, further promoting this type of yield behavior. The brittle-to-ductile phenomenon is found to require both larger particles for void growth and smaller particles that induce the lowering of yield stress.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
Application of equivalent model method to dynamic rheo‐optical properties of crystalline polymer
Takayanagi, M., Uemura, S., & Minami, S. (1964) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070050111 · Cited by 323
Cited by
THOSTENSON, E., LI, C., & CHOU, T. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.11.003 · Cited by 1,734
Structural and mechanical properties of polymer nanocomposites
Tjong, S. C. (2006) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2006.06.001 · Cited by 1,531
Polymer nanocomposites: A small part of the story
Schadler, L. S., Brinson, L. C., & Sawyer, W. G. (2007) · JOM · doi:10.1007/s11837-007-0040-5 · Cited by 298
Self-citationRamanathan, T., Stankovich, S., Dikin, D. A., Liu, H., Shen, H., Nguyen, S. T., & Brinson, L. C. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21187 · Cited by 263
Metadata
- Authors
- Ash, B. J., Siegel, R. W., & Schadler, L. S.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-01-17
- Volume
- 37
- Issue
- 4
- Pages
- 1358-1369
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2076227462
- Cited by
- 247
- References
- 2
- FWCI
- 14.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.