Viscous-Force-Dominated Tensile Deformation Behavior of Oriented Polyethylene
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
High-density polyethylene with shish-kebab structure, prepared by a melt extrusion drawing, was employed to investigate the effect of the well-defined lamellar orientation on the deformation characteristics under uniaxial tensile deformation along the drawing direction. This was done by investigating the true stress−true strain dependencies at different strain rates, recovery properties, and stress relaxation measurements. Measurements were complemented by recording in-situ wide-angle X-ray scattering patterns during the deformation process. The oriented samples showed not only a higher modulus, but different from analogous isotropic samples, a homogeneous deformation without necking. The true strain associated with the onset of fibrillation was determined. Because of the preorientation, it is shifted to 0.3, which is below the value 0.6 of the isotropic counterpart. The main finding is a strong enhancement of the viscous force, as was revealed by stress relaxation experiments; the viscous force takes up 70% of the total stress. The presence of shish-kebabs, i.e., interconnected lamellae in a stack, seems to be responsible for the high viscous force in the oriented samples. The absence of necking has to be ascribed to the high viscous force. The viscous force, which increases with the strain, gives also a major contribution to the measured tensile modulus.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hiss, R., Hobeika, S., Lynn, C., & Strobl, G. (1999) · Macromolecules · doi:10.1021/ma981776b · Cited by 540
Self-citationVideo-controlled tensile testing of polymers and metals beyond the necking point
G'Sell, C., Hiver, J. M., Dahoun, A., & Souahi, A. (1992) · Journal of Materials Science · doi:10.1007/bf01105270 · Cited by 299
Bartczak, Z., & Kozanecki, M. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.100 · Cited by 108
Bartczak, Z., & Lezak, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.092 · Cited by 68
Bartczak, Z. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.096 · Cited by 50
Cited by
Cavitation during deformation of semicrystalline polymers
Pawlak, A., Galeski, A., & Rozanski, A. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.10.007 · Cited by 355
Plasticity of semicrystalline polymers
Bartczak, Z., & Galeski, A. (2010) · Macromolecular Symposia · doi:10.1002/masy.201050807 · Cited by 150
Bartczak, Z. (2010) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21873 · Cited by 60
Metadata
- Authors
- Na, B., Zhang, Q., Fu, Q., Men, Y., Hong, K., & Strobl, G.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-03-07
- Volume
- 39
- Issue
- 7
- Pages
- 2584-2591
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2073972431
- Cited by
- 46
- References
- 5
- FWCI
- 3.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.