The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Initiated Chemical Vapor Deposition (iCVD) of Poly(alkyl acrylates): An Experimental Study
Abstract
In a two-part investigation, an experimental study and a kinetic model analysis of the initiated chemical vapor deposition (iCVD) of alkyl acrylate polymers are described. In this first part, an experimental study was performed to look at the effect of process parameters on iCVD polymerization. A homologous series of alkyl acrylates, from ethyl up to hexyl acrylate, were iCVD polymerized. The resulting polymers matched well spectroscopically with those from liquid-phase polymerization, demonstrating that stoichiometric polymers with no observable cross-linking can be achieved in a chemical vapor deposition environment. Deposition rate and molecular weight increased by a factor of over 300 and 60, respectively, when monomer saturated vapor pressure, P sat, was reduced from 42.6 to 0.584 Torr at equal gas pressures, P M . Over three times increase in deposition rate was observed for ethyl acrylate when substrate temperature was reduced from 29 to 17 °C. These trends are attributed to an increase in P M / P sat or, equivalently, monomer surface concentration in Henry's law limit at low P M / P sat . Evidence for adsorption-limited iCVD kinetics came from an apparent negative activation energy of −79.4 kJ/mol obtained experimentally that agreed well with a mathematically derived activation energy of −81.8 kJ/mol equal to twice the heat of desorption in the negative sense. Adsorption measurements found Henry's law limit to be valid and, when fitted to a BET equation, allowed the heat of desorption to be calculated. On the basis of this experimental study, process guidelines were made to define the appropriate parameter space for future iCVD polymerization, with P M / P sat in the range of 0.4−0.7 recommended as an optimal iCVD window.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Principles of Polymer Chemistry.
Huggins, M. L. (1954) · Journal of the American Chemical Society · doi:10.1021/ja01639a090 · Cited by 16,550
Verwendung von Schwingquarzen zur W�gung d�nner Schichten und zur Mikrow�gung
Sauerbrey, G. (1959) · Zeitschrift f�r Physik · doi:10.1007/bf01337937 · Cited by 9,653
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Use of quartz vibration for weighing thin films on a microbalance
Sauerbrey, G., & Sauerbrey, F. (1959) · The European Physical Journal A · Cited by 6,791
Encyclopedia of polymer science and technology
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0674 · Cited by 5,095
Nist chemistry webbook, nist standard reference database number 69
Linstorm, P. (1998) · Medical Entomology and Zoology · Cited by 4,606
(1985) · Elsevier eBooks · doi:10.1016/c2012-0-01688-2 · Cited by 1,130
The Synthesis of 1,4-Dimethylphenanthrene by Cyclodehydration Methods
Papa, D., Perlman, D., & Bogert, M. T. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a024 · Cited by 136
Cited by
Sun, L., Yuan, G., Gao, L., Yang, J., Chhowalla, M., Gharahcheshmeh, M. H., Gleason, K. K., Choi, Y. S., Hong, B. H., & Liu, Z. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-020-00005-y · Cited by 793
Self-citationChemical Vapor Deposition of Conformal, Functional, and Responsive Polymer Films
Alf, M. E., Asatekin, A., Barr, M. C., Baxamusa, S. H., Chelawat, H., Ozaydin‐Ince, G., Petruczok, C. D., Sreenivasan, R., Tenhaeff, W. E., Trujillo, N. J., et al. (2010) · Advanced Materials · doi:10.1002/adma.200902765 · Cited by 399
Self-citationSojoudi, H., Wang, M., Boscher, N. D., McKinley, G. H., & Gleason, K. K. (2016) · Soft Matter · doi:10.1039/c5sm02295a · Cited by 352
Self-citationMoon, H., Seong, H., Shin, W. C., Park, W.-T., Kim, M., Lee, S., Bong, J. H., Noh, Y.-Y., Cho, B. J., Yoo, S., et al. (2015) · Nature Materials · doi:10.1038/nmat4237 · Cited by 287
Building Bio‐Inspired Artificial Functional Nanochannels: From Symmetric to Asymmetric Modification
Hou, X., Zhang, H., & Jiang, L. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201104904 · Cited by 261
Coclite, A. M., Howden, R. M., Borrelli, D. C., Petruczok, C. D., Yang, R., Yagüe, J. L., Ugur, A., Chen, N., Lee, S., Jo, W. J., et al. (2013) · Advanced Materials · doi:10.1002/adma.201301878 · Cited by 254
Self-citation
Metadata
- Authors
- Lau, K. K. S., & Gleason, K. K.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-11
- Volume
- 39
- Issue
- 10
- Pages
- 3688-3694
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2050254032
- Cited by
- 303
- References
- 9
- FWCI
- 6.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.