The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Initiated Chemical Vapor Deposition (iCVD) of Poly(alkyl acrylates): A Kinetic Model
Abstract
In a two-part investigation, an experimental study and a kinetic model analysis of the initiated chemical vapor deposition (iCVD) of alkyl acrylate polymers are described. In this second part, a kinetic model was developed to examine the reaction mechanisms of iCVD polymerization. The model incorporated surface polymerization events of initiation, propagation, and termination as well as primary radical termination and recombination. By using a multiresponse parameter estimation procedure based on minimizing a determinant criterion, the model fitted closely to experimental data on butyl acrylate iCVD that measured the effect of a change in monomer surface concentration on both the rate of polymerization and polymer molecular weight. Model propagation and termination rate coefficients, 15 540 and 0.98 × 10 6 L/mol·s, respectively, matched well with those of liquid-phase butyl acrylate radical polymerization, 15 460 and 10 6 L/mol·s, respectively. The model captured the linear dependencies of rate and molecular weight to monomer concentration typical of liquid-phase radical polymerization. At low concentrations, the model further captured the nonlinear rate behavior, which was attributed to significant primary radical termination. Sensitivity analysis revealed a well-behaved model with model parameters that trended realistically. These results provided strong support for a surface-driven iCVD polymerization that is surprisingly analogous to bulk-phase free radical polymerization. A proven iCVD kinetic model would ultimately facilitate process scale-up and provide a priori predictions on the feasibility of new iCVD chemistries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Cited by
Chemical Vapor Deposition of Conformal, Functional, and Responsive Polymer Films
Alf, M. E., Asatekin, A., Barr, M. C., Baxamusa, S. H., Chelawat, H., Ozaydin‐Ince, G., Petruczok, C. D., Sreenivasan, R., Tenhaeff, W. E., Trujillo, N. J., et al. (2010) · Advanced Materials · doi:10.1002/adma.200902765 · Cited by 399
Self-citationMoon, H., Seong, H., Shin, W. C., Park, W.-T., Kim, M., Lee, S., Bong, J. H., Noh, Y.-Y., Cho, B. J., Yoo, S., et al. (2015) · Nature Materials · doi:10.1038/nmat4237 · Cited by 287
Coclite, A. M., Howden, R. M., Borrelli, D. C., Petruczok, C. D., Yang, R., Yagüe, J. L., Ugur, A., Chen, N., Lee, S., Jo, W. J., et al. (2013) · Advanced Materials · doi:10.1002/adma.201301878 · Cited by 254
Self-citation
Metadata
- Authors
- Lau, K. K. S., & Gleason, K. K.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-11
- Volume
- 39
- Issue
- 10
- Pages
- 3695-3703
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1977726516
- Cited by
- 181
- References
- 2
- FWCI
- 5.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.