The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Characterization of Some New Olefinic Block Copolymers
Abstract
Exciting new developments in polyolefin synthesis give rise to olefinic block copolymers with properties typical of thermoplastic elastomers. The blocky copolymers synthesized by chain shuttling technology consist of crystallizable ethylene−octene blocks with low comonomer content and high melting temperature (hard blocks), alternating with amorphous ethylene−octene blocks with high comonomer content and low glass transition temperature (soft blocks). This paper describes the materials science of these unique polymers as characterized by thermal analysis, X-ray diffraction, microscopy, and tensile deformation. The crystallizable nature of the hard block and the crystalline morphologies are consistent with an average hard block length that is well in excess of 200 carbon atoms. The crystallizable blocks are long enough to form well-organized lamellar crystals with the orthorhombic unit cell and high melting temperature. The lamellae are organized into space-filling spherulites in all compositions even in copolymers with only 18 wt % hard block. The morphology is consistent with crystallization from a miscible melt. Crystallization of the hard blocks forces segregation of the noncrystallizable soft blocks into the interlamellar regions. Good separation of hard and soft blocks in the solid state is confirmed by distinct and separate β- and α-relaxations in all the blocky copolymers. Compared to statistical ethylene−octene copolymers, the blocky architecture imparts a substantially higher crystallization temperature, a higher melting temperature and a better organized crystalline morphology, while maintaining a lower glass transition temperature. The differences between blocky and statistical copolymers become progressively more apparent as the total comonomer content increases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Morphology of semicrystalline block copolymers of ethylene-(ethylene-alt-propylene)
Rangarajan, P., Register, R. A., & Fetters, L. J. (1993) · Macromolecules · doi:10.1021/ma00069a034 · Cited by 191
Cited by
From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites
Stürzel, M., Mihan, S., & Mülhaupt, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00310 · Cited by 822
FI Catalysts for Olefin Polymerization—A Comprehensive Treatment
Makio, H., Terao, H., Iwashita, A., & Fujita, T. (2011) · Chemical Reviews · doi:10.1021/cr100294r · Cited by 653
Coordinative Chain Transfer Polymerization
Valente, A., Mortreux, A., Visseaux, M., & Zinck, P. (2013) · Chemical Reviews · doi:10.1021/cr300289z · Cited by 411
Zanchin, G., & Leone, G. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101342 · Cited by 326
Chemically recyclable polyolefin-like multiblock polymers
Zhao, Y., Rettner, E. M., Harry, K. L., Hu, Z., Miscall, J., Rorrer, N. A., & Miyake, G. M. (2023) · Science · doi:10.1126/science.adh3353 · Cited by 205
Metadata
- Authors
- Wang, H. P., Khariwala, D. U., Cheung, W., Chum, S. P., Hiltner, A., & Baer, E.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-03-14
- Volume
- 40
- Issue
- 8
- Pages
- 2852-2862
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2018055355
- Cited by
- 176
- References
- 1
- FWCI
- 9.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.