Cavitation during Tensile Deformation of Polypropylene
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The process of cavitation during tensile deformation of polypropylene was studied. It was shown that in injection-molded polypropylene samples cavities appear in the center of a sample shortly before yielding. With increasing deformation the cavities change their size, number, and orientation from elongated perpendicular to parallel to deformation. The cavitation process is visible also as a rapid increase of volume of deformed material. The cavitation could be suppressed by changing internal morphology of polypropylene by fast cooling. The samples prepared by compression molding followed by quenching, with less perfect crystals, were able to deform by plastic deformation of crystals without cavitation. However, for faster draw rate the cavitation in amorphous phase was preferred again due to stronger response of crystals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hiss, R., Hobeika, S., Lynn, C., & Strobl, G. (1999) · Macromolecules · doi:10.1021/ma981776b · Cited by 540
Lezak, E., Bartczak, Z., & Galeski, A. (2006) · Polymer · doi:10.1016/j.polymer.2006.10.016 · Cited by 97
Cited by
Cavitation during deformation of semicrystalline polymers
Pawlak, A., Galeski, A., & Rozanski, A. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.10.007 · Cited by 355
Self-citationTime and temperature effects on Poisson’s ratio of poly(butylene terephthalate)
Pandini, S., & Pegoretti, A. (2011) · Express Polymer Letters · doi:10.3144/expresspolymlett.2011.67 · Cited by 46
Metadata
- Authors
- Pawlak, A., & Galeski, A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-03-19
- Volume
- 41
- Issue
- 8
- Pages
- 2839-2851
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1979060258
- Cited by
- 216
- References
- 2
- FWCI
- 7.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.