Direct Observation of the Relief Structure Formation in the Nearly Symmetric Poly(styrene)-block-poly(ε-caprolactone) Diblock Copolymer Thin Film
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
The relief structure formation associated with microphase separation and dewetting of the nearly symmetric poly(styrene)- block -poly(ε-caprolactone) diblock copolymer thin film was studied in this work, for which a suite of complementary methods, namely atomic force microscopy, optical microscopy, and X-ray photoelectron spectroscopy combined with hot stages, were applied. Through control of the microphase separation strength, indicated by the χ N (where χ and N indicate the Flory–Huggins interaction parameter and the total degree of polymerization, respectively), varied relief structures were observed. On one side, when there was no microphase separation (χ N = 3.9), typical droplets resulting from autophobic dewetting were revealed. On the other side, when there was intermediate microphase separation (χ N ≥ 14.0), superimposed lamellae except for droplets was discerned. Moreover, with continual heating, the formation of the superimposed lamellae and its dynamic transition to ordered droplets were first revealed with the in situ AFM scanning. On the basis of these findings, we conclude that the superimposed lamella is a metastable structure, resulting from the coupling of dewetting and microphase separation, and it finally reaches the equilibrium droplets. The formation of superimposed lamellae was attributed to that the microphase separation strength was forced to yield to the minimization tendency of surface tension.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The Physics of Block Copolymers
Hamley, I. W. (1998) · doi:10.1093/oso/9780198502180.001.0001 · Cited by 1,913
High resolution XPS of organic polymers The Scienta ESCA300 Database
Comyn, J. (1993) · International Journal of Adhesion and Adhesives · doi:10.1016/0143-7496(93)90011-w · Cited by 1,330
Block Copolymer Thin Films: Physics and Applications
Fasolka, M. J., & Mayes, A. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.323 · Cited by 904
Residual stresses in thin polymer films cause rupture and dominate early stages of dewetting
Reiter, G., Hamieh, M., Damman, P., Sclavons, S., Gabriele, S., Vilmin, T., & Raphaël, E. (2005) · Nature Materials · doi:10.1038/nmat1484 · Cited by 356
Observed frustration in confined block copolymers
Lambooy, P., Russell, T. P., Kellogg, G. J., Mayes, A. M., Gallagher, P. D., & Satija, S. K. (1994) · Physical Review Letters · doi:10.1103/physrevlett.72.2899 · Cited by 261
Wetting and Slippage of Polymer Melts on Semi-ideal Surfaces
Brochard-Wyart, F., de Gennes, P.-G., Hervert, H., & Redon, C. (1994) · Langmuir · doi:10.1021/la00017a040 · Cited by 205
Instabilities of Thin Polymer Films on Layers of Chemically Identical Grafted Molecules
Reiter, G., Auroy, P., & Auvray, L. (1996) · Macromolecules · doi:10.1021/ma950297z · Cited by 183
Block copolymer thin films: pattern formation and phase behavior
Green, P. F., & Limary, R. (2001) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(01)00055-0 · Cited by 174
Imaging of Polymers Using Scanning Force Microscopy: From Superstructures to Individual Molecules
Sheiko, S. S. (2007) · Springer eBooks · doi:10.1007/3-540-48763-8_2 · Cited by 103
Dewetting Instabilities in Thin Block Copolymer Films: Nucleation and Growth
Limary, R., & Green, P. F. (1999) · Langmuir · doi:10.1021/la981693o · Cited by 95
Research works printed but not linked: 5
- Seemann R., 2005, J. Phys.: Condens. Matter, 17, S267
- Muller-Buschbaum P., 2005, J. Phys.: Condens. Matter, 17, S363
- Ausserre D., 1993, J. Phys. II, 3, 1485
- Godovsky Y. K., 2001, Polym. Sci., Ser. A, 43, 647
- Brandrup J., 1989, Polymer Handbook
Cited by
Zhang, P., Santoro, G., Yu, S., Vayalil, S. K., Bommel, S., & Roth, S. V. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b00892 · Cited by 34
Self-citationSwelling of Block Copolymer Nanoparticles: A Process Combining Deformation and Phase Separation
Mei, S., Wang, L., Feng, X., & Jin, Z. (2013) · Langmuir · doi:10.1021/la400390b · Cited by 29
Kalloudis, M., Glynos, E., Pispas, S., Walker, J., & Koutsos, V. (2013) · Langmuir · doi:10.1021/la400041x · Cited by 23
Zhang, P., Huang, H., Chen, Y., Yu, S., Krywka, C., Vayalil, S. K., Roth, S. V., & He, T. (2014) · Chinese Journal of Polymer Science · doi:10.1007/s10118-014-1506-x · Cited by 18
Self-citationYin, S., Zou, Y., Reus, M. A., Jiang, X., Tu, S., Tian, T., Qi, R., Xu, Z., Liang, S., Cheng, Y., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140135 · Cited by 13
Metadata
- Authors
- Zhang, P., Wang, Z., Huang, H., & He, T.
- Affiliations
- Chinese Academy of Sciences (CN)
- Ningbo Institute of Industrial Technology (CN)
- Corresponding author
- He, Tianbai
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-11-14
- Volume
- 45
- Issue
- 22
- Pages
- 9139-9146
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2313419188
- Cited by
- 13
- References
- 41
- Citations by year
- 2025: 1 · 2024: 1 · 2023: 1 · 2022: 1 · 2020: 1 · 2016: 2 · 2015: 2 · 2014: 1 · 2013: 3
- FWCI
- 0.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Physical Sciences › Engineering › Computational Mechanics › Fluid Dynamics and Thin Films
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- diblock copolymer thin films, microphase separation, dewetting, Flory-Huggins interaction parameter, droplet formation, annealing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.