The DOI matches its Crossref record.
Confinement of Ionic Liquid by Networked Polymers Based on Multifunctional Epoxy Resins
Abstract
Networked polymers confining an ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide (EMImTFSI), were prepared by curing a mixture of bisphenol A diglycidyl ether (BADGE) and tetrafunctional epoxy resins with tetraethylenepentamine (TEPA) in the presence of ionic liquid. It was found that addition of the tetrafunctional epoxy resins was inevitable for better ionic liquid confinement. The ionic liquid confinement, ionic conductivity, mechanical strength, and morphology of the materials strongly depended on the ionic liquid content. At a low ionic liquid content (<40 wt %), the material tightly confined the ionic liquid and showed little ionic conductivity with a high Young’s modulus, while at a high ionic liquid content (>40 wt %), it did not confine the ionic liquid showing higher ionic conductivity with a low Young’s modulus. At a high ionic liquid content (>40 wt %), microphase separation between the ionic liquid and the epoxy networked polymer was observed by scanning electron microscopy (SEM). A transition of the microphase separation from discrete sphere to continuous structure was also observed between 40 wt % and 50 wt % ionic liquid contents. This morphology transition caused a drastic change of the material properties around these ionic liquid contents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ionogels, ionic liquid based hybrid materials
Le Bideau, J., Viau, L., & Vioux, A. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00059k · Cited by 1,285
Advanced applications of ionic liquids in polymer science
Lu, J., Yan, F., & Texter, J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.001 · Cited by 1,113
Electrolyte‐Gated Transistors for Organic and Printed Electronics
Kim, S. H., Hong, K., Xie, W., Lee, K. H., Zhang, S., Lodge, T. P., & Frisbie, C. D. (2013) · Advanced Materials · doi:10.1002/adma.201202790 · Cited by 957
Zhang, S., Zhang, J., Zhang, Y., & Deng, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00509 · Cited by 659
Ionic liquid polymer electrolytes
Ye, Y.-S., Rick, J., & Hwang, B.-J. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00126h · Cited by 517
“Cut and Stick” Rubbery Ion Gels as High Capacitance Gate Dielectrics
Lee, K. H., Kang, M. S., Zhang, S., Gu, Y., Lodge, T. P., & Frisbie, C. D. (2012) · Advanced Materials · doi:10.1002/adma.201200950 · Cited by 464
Metadata
- Authors
- Matsumoto, K., & Endo, T.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-09-04
- Volume
- 41
- Issue
- 19
- Pages
- 6981-6986
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2042950349
- Cited by
- 167
- References
- 0
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.