The DOI matches its Crossref record.
Relation between Photoactive Layer Thickness, 3D Morphology, and Device Performance in P3HT/PCBM Bulk-Heterojunction Solar Cells
Abstract
To get an efficient organic solar cell, as much light as possible should be absorbed by the photoactive layer; as a consequence, thick layers should be preferable. However, it is often observed that much thinner photoactive layers result in more efficient devices than the corresponding thicker layers absorbing more light. Besides light absorption, other aspects such as efficient exciton dissociation, charge transportation, and charge collection are of crucial importance, and all of them are strongly influenced by the volume morphology of the photoactive layer. In this study of bulk-heterojunction solar cells based on poly(3-hexylthiophene) (P3HT) and a methanofullerene derivative (PCBM), we show that the resulting P3HT/PCBM morphology is strongly determined by the layer thickness because the kinetics of solvent evaporation and crystallization is different in films of different thickness. For the preparation conditions chosen in this study, an optimum morphological organization of the photoactive layer characterized by high crystallinity of P3HT, viz. numerous crystalline P3HT nanowires forming a genuine three-dimensional network, and enrichment of crystalline P3HT closer to the hole collecting electrode can only be achieved for relatively thin (100 nm) P3HT/PCBM layers. Corresponding devices absorb only a limited fraction of all available photons but have the highest efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Polymer–fullerene bulk heterojunction solar cells
Deibel, C., & Dyakonov, V. (2010) · Reports on Progress in Physics · doi:10.1088/0034-4885/73/9/096401 · Cited by 825
Interface investigation and engineering – achieving high performance polymer photovoltaic devices
Chen, L.-M., Xu, Z., Hong, Z., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/b925382c · Cited by 565
Yin, Z., & Zheng, Q. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100560 · Cited by 374
van Bavel, S. S., Bärenklau, M., de With, G., Hoppe, H., & Loos, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902247 · Cited by 279
Self-citationProbing Organic Thin Films by Coherent X-ray Imaging and X-ray Scattering
Patil, N., Narayanan, T., Michels, L., Skjønsfjell, E. T. B., Guizar-Sicairos, M., Van den Brande, N., Claessens, R., Van Mele, B., & Breiby, D. W. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00324 · Cited by 6
Metadata
- Authors
- van Bavel, S., Sourty, E., de With, G., Frolic, K., & Loos, J.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-09-10
- Volume
- 42
- Issue
- 19
- Pages
- 7396-7403
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2159490537
- Cited by
- 195
- References
- 0
- FWCI
- 19.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Relation between Photoactive Layer Thickness, 3D Morphology, and Device Performance in P3HT/PCBM Bulk-Heterojunction Solar Cells. https://app.cochat.ai/papers/10.1021/ma900817t
- The paper
- van Bavel, S., Sourty, E., de With, G., Frolic, K., & Loos, J. (2009). Relation between Photoactive Layer Thickness, 3D Morphology, and Device Performance in P3HT/PCBM Bulk-Heterojunction Solar Cells. Macromolecules. https://doi.org/10.1021/ma900817t
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.