Effect of Catalyst and Polymerization Conditions on the Preparation of Low Molecular Weight Lactic Acid Polymers
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The synthesis of low molecular weight ( M̄ n (NMR) < 27 000 g/mol) lactic acid polymers by condensation polymerization of l -lactic acid was investigated. All polymerizations were carried out in the melt, using different catalysts and polymerization temperatures. The products were characterized by DSC, GPC, titrimetric methods, and 13 C-NMR. According to NMR, the resulting polymers contained less than 1 mol % of lactic acid monomer and less than 6.6 mol % of lactide. In 13 C-NMR studies, the molecular weights were calculated by using the previously identified end group peaks in the methine area. The calculated molecular weights were systematically smaller than the weight-average molecular weights determined by GPC and on the same order as the molecular weights determined by titrimetric methods. The weight-average molecular weights of prepared prepolymers determined by GPC varied from 3600 to 32 600 g/mol, depending on the catalyst and polycondensation conditions. In DSC studies the glass transition temperatures of the resulting polymers varied from 24 to 51 °C, and crystallinity varied from 0% to 52%. The annealing of the polymer samples had only a small effect on glass transition temperatures and crystallinity. According to our results, the best polycondensation catalyst was sulfuric acid, which produced the highest molecular weights and over 50% crystallinity. Sn(II) octoate produced quite a high molecular weight polymer which was totally amorphous (the proportion of d -lactic acid structures was about 48 mol %).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Coordination polymerization of lactides, 1. Structure determination of obtained polymers
Bero, M., Kasperczyk, J., & Jedlinski, Z. J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021911007 · Cited by 190
Cited by
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Santerre, J. P., Woodhouse, K., Laroche, G., & Labow, R. S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.079 · Cited by 718
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
L (+) lactic acid fermentation and its product polymerization
Srivastava, A., Narayanan, N., & Roychoudhury, P. K. (2004) · Electronic Journal of Biotechnology · doi:10.2225/vol7-issue2-fulltext-7 · Cited by 280
Metadata
- Authors
- Hiltunen, K., Seppälä, J. V., & Härkönen, M.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-02-01
- Volume
- 30
- Issue
- 3
- Pages
- 373-379
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2078415890
- Cited by
- 112
- References
- 2
- FWCI
- 1.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.