The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Polymer Blends of Natural Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and a Synthetic Atactic Poly(3-hydroxybutyrate). Characterization and Biodegradation Studies
Abstract
Blends of synthetic atactic poly(3-hydroxybutyrate) (a-PHB) with a natural bacterial isotactic copolymer of 3-hydroxybutyrate with 3-hydroxyvalerate (PHBV) containing 10 mol % of 3HV units were prepared using a simple casting procedure. In the range of compositions explored (10−50% a-PHB), blends of bacterial PHBV and synthetic atactic a-PHB were miscible in the melt and solidified with spherulitic morphology. The influence of a-PHB content on the thermal and mechanical properties of the blends was evaluated. The degree of crystallinity decreased with increasing content of a-PHB in the film samples, and the elongation at break for a sample containing 50% of a-PHB was 30-fold that of pure PHBV. Degradation experiments, both hydrolytic (pH = 7.4, T = 70 °C) and enzymatic (PHB-depolymerase A from Pseudomonas lemoignei, Tris-HCl buffer (pH = 8), T = 37 °C), were performed for both polymers and polymer blends. The rate of enzymatic degradation of the blends was higher than that of PHBV and increased with a-PHB content in the blends studied, whereas pure a-PHB did not biodegrade under these conditions. 3-Hydroxybutyric acid and its dimer were identified by HPLC as biodegradation products of both pure PHBV and its blends with a-PHB. Higher oligomers up to heptamer were detected as degradation products of the blends by APCI-MS and ESI-MS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Doi, Y., Kanesawa, Y., Kunioka, M., & Saito, T. (1990) · Macromolecules · doi:10.1021/ma00203a006 · Cited by 515
Cited by
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
Occurrence, synthesis and medical application of bacterial polyhydroxyalkanoate
Zinn, M., Witholt, B., & Egli, T. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00218-6 · Cited by 802
The Chemomechanical Properties of Microbial Polyhydroxyalkanoates
Laycock, B., Halley, P., Pratt, S., Werker, A., & Lant, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.003 · Cited by 604
Thermal, mechanical and morphological characterization of plasticized PLA–PHB blends
Abdelwahab, M. A., Flynn, A., Chiou, B.-S., Imam, S., Orts, W., & Chiellini, E. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.05.036 · Cited by 454
Production of polyhydroxyalkanoates: the future green materials of choice
Akaraonye, E., Keshavarz, T., & Roy, I. (2010) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2392 · Cited by 393
Metadata
- Authors
- Scandola, M., Focarete, M. L., Adamus, G., Sikorska, W., Baranowska, I., Świerczek, S., Gnatowski, M., Kowalczuk, M., & Jedliński, Z.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-05-01
- Volume
- 30
- Issue
- 9
- Pages
- 2568-2574
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2078751866
- Cited by
- 198
- References
- 1
- FWCI
- 5.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.