Solid-State Postpolymerization of l-Lactide Promoted by Crystallization of Product Polymer: An Effective Method for Reduction of Remaining Monomer
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Solid-state postpolymerization of l -lactide was studied by two different ways with 0.1 mol % of stannous 2-ethyl hexanoate as the catalyst. In a two-step method, the ordinary melt polymerization of l -lactide was first performed at temperatures higher than the crystallization temperature ( T c ) of poly( l -lactide) (PLLA), and then the postpolymerization was continued around the T c of PLLA. As PLLA crystallized in the second stage ( e.g., when the temperature was changed from 140 to 120 °C), the monomer consumption was found to reach 100% because the monomer and catalyst could be concentrated in the amorphous part. Without the crystallization of PLLA occurring in the postpolymerization, a homogeneous supercooling state was formed to have a remaining monomer ratio exceeding 5 wt %. In the alternative one-step method where the polymerization was continued around the T c of PLLA, the polymer crystallization was induced during the polymerization to promote the monomer consumption to reach 100%. The kinetic analysis of this polymerization revealed that the rate of monomer consumption is inversely proportional to the square of the amorphous ratio of PLLA, which is opposite to the crystal ratio. However, the molecular weight did not increase with the monomer consumption. This should be because various oligomers are formed in the postpolymerization stage by the ester interchange reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Polylactones: 31. Sn(II)octoate-initiated polymerization of L-lactide: a mechanistic study
Kricheldorf, H. R., Kreiser-Saunders, I., & Boettcher, C. (1995) · Polymer · doi:10.1016/0032-3861(95)93928-f · Cited by 411
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Journal of Environmental Polymer Degradation · doi:10.1007/bf02068677 · Cited by 322
Polylactones, 19. Anionic polymerization of L‐lactide in solution
Kricheldorf, H. R., & Kreiser‐Saunders, I. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910508 · Cited by 149
Cited by
Chemical syntheses of biodegradable polymers
Okada, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00039-9 · Cited by 1,199
Kowalski, A., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma000125o · Cited by 482
Fukushima, K., & Kimura, Y. (2006) · Polymer International · doi:10.1002/pi.2010 · Cited by 432
Self-citationMelt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
Moon, S.-I., Lee, C.-W., Taniguchi, I., Miyamoto, M., & Kimura, Y. (2001) · Polymer · doi:10.1016/s0032-3861(00)00889-2 · Cited by 259
Self-citationThermal degradation behaviour of poly(lactic acid) stereocomplex
Fan, Y., Nishida, H., Shirai, Y., Tokiwa, Y., & Endo, T. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.03.001 · Cited by 199
Naolou, T., Lendlein, A., & Neffe, A. T. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00346 · Cited by 5
“, 1999), even when using solid-state polymerization (Shinno et al., 1997), which shows one benefit of the NPCA.”
Background
Metadata
- Authors
- Shinno, K., Miyamoto, M., Kimura, Y., Hirai, Y., & Yoshitome, H.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-10-01
- Volume
- 30
- Issue
- 21
- Pages
- 6438-6444
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2073370918
- Cited by
- 69
- References
- 5
- FWCI
- 1.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.