Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Small-angle X-ray scattering (SAXS), optical microscopy and differential scanning calorimetry were used to establish relationships between crystallization, microstructure, and equilibrium melting temperature ( T m 0 ) for random copolymers of poly( l -lactide- co - meso -lactide). T m 0 s derived using the Gibbs−Thomson and data-fitting 23 approaches were found to be in excellent agreement and decreased significantly with increasing meso -lactide concentration. Analysis of these equilibrium melting temperatures using models for copolymer crystallization leads to the conclusion that the meso defects are rejected from the crystalline regions. From analysis of the SAXS data, it was concluded that the copolymers contained significant interfibrillar regions whose concentration increased with higher comonomer content. Spherulitic growth rates were strongly dependent on meso content and were analyzed using the Lauritzen−Hoffman kinetic theory of crystal growth.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Treatise on Solid State Chemistry: Volume 6B Surfaces II
(1976) · Springer eBooks · doi:10.1007/978-1-4613-4316-5 · Cited by 1,408
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Hoffman, J. D., & Miller, R. L. (1997) · Polymer · doi:10.1016/s0032-3861(97)00071-2 · Cited by 1,065
Theory of crystallization in copolymers
Flory, P. J. (1955) · Transactions of the Faraday Society · doi:10.1039/tf9555100848 · Cited by 889
(1980) · Elsevier eBooks · doi:10.1016/c2009-0-22032-0 · Cited by 864
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Tsuji, H. (1995) · Polymer · doi:10.1016/0032-3861(95)93647-5 · Cited by 519
Reed, A. M., & Gilding, D. K. (1981) · Polymer · doi:10.1016/0032-3861(81)90168-3 · Cited by 502
Research works printed but not linked: 4
- Huang J., 1996, ACS Polymer Preprints, 37, 370
- Loomis G. L., 1990, ACS Polymer Preprints, 31, 55
- Hoffman J. D., 1976, in Treatise on Solid State Chemistry, 3
- Iler H. D. Ph.D., 1995, Virginia Institute of Technology and State University
Cited by
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Progress in bio-based plastics and plasticizing modifications
Mekonnen, T., Mussone, P., Khalil, H., & Bressler, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12555f · Cited by 831
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710
Piezoelectric polymers: theory, challenges and opportunities
Smith, M., & Kar-Narayan, S. (2022) · International Materials Reviews · doi:10.1080/09506608.2021.1915935 · Cited by 366
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
Tsuji, H., Takai, H., & Saha, S. K. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.074 · Cited by 353
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R. (2006) · Polymer Engineering & Science · doi:10.1002/pen.20609 · Cited by 289
Stoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C. (2010) · Macromolecules · doi:10.1021/ma101430c · Cited by 271
Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications
Teixeira, S., Eblagon, K. M., Miranda, F., R. Pereira, M. F., & Figueiredo, J. L. (2021) · C · doi:10.3390/c7020042 · Cited by 237
A Spectroscopic Analysis of Poly(lactic acid) Structure
Kang, S., Hsu, S. L., Stidham, H. D., Smith, P. B., Leugers, M. A., & Yang, X. (2001) · Macromolecules · doi:10.1021/ma0016026 · Cited by 218
Crystallinity and mechanical properties of optically pure polylactides and their blends
Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20331 · Cited by 214
Polylactide-based polyurethane and its shape-memory behavior
Wang, W., Ping, P., Chen, X., & Jing, X. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.11.029 · Cited by 212
Biodegradable Piezoelectric Polymers: Recent Advancements in Materials and Applications
Ali, M., Bathaei, M. J., Istif, E., Karimi, S. N. H., & Beker, L. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300318 · Cited by 211
Nonisothermal cold crystallization behavior and kinetics of polylactide/clay nanocomposites
Wu, D., Wu, L., Wu, L., Xu, B., Zhang, Y., & Zhang, M. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21154 · Cited by 202
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao, R., Yang, B., Yu, W., & Zhou, C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25733 · Cited by 199
Temperature dependent variations in the lamellar structure of poly(l-lactide)
Cho, T.-Y., & Strobl, G. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.027 · Cited by 171
BCNU-loaded PEG–PLLA ultrafine fibers and their in vitro antitumor activity against Glioma C6 cells
Xu, X., Chen, X., Xu, X., Lu, T., Wang, X., Yang, L., & Jing, X. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.05.031 · Cited by 169
Chen, H.-L., Dutta, S., Huang, P.-Y., & Lin, C.-C. (2012) · Organometallics · doi:10.1021/om201281w · Cited by 170
Stoclet, G., Seguela, R., & Lefebvre, J.-M. (2011) · Polymer · doi:10.1016/j.polymer.2011.02.002 · Cited by 165
Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites
Manshor, M. R., Anuar, H., Nur Aimi, M. N., Ahmad Fitrie, M. I., Wan Nazri, W. B., Sapuan, S. M., El-Shekeil, Y. A., & Wahit, M. U. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.062 · Cited by 166
Crystallization kinetics of virgin and processed poly (lactic acid)
Pantani, R., De Santis, F., Sorrentino, A., De Maio, F., & Titomanlio, G. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.018 · Cited by 161
Yan, S., Yin, J., Yang, Y., Dai, Z., Ma, J., & Chen, X. (2007) · Polymer · doi:10.1016/j.polymer.2007.01.037 · Cited by 158
Blending Effects on Polymorphic Crystallization of Poly( l -lactide)
Pan, P., Liang, Z., Zhu, B., Dong, T., & Inoue, Y. (2009) · Macromolecules · doi:10.1021/ma8024943 · Cited by 163
Influence of α′‐/α‐crystal polymorphism on properties of poly( l ‐lactic acid)
Lorenzo, M. L. D., & Androsch, R. (2018) · Polymer International · doi:10.1002/pi.5707 · Cited by 157
Baratian, S., Hall, E. S., Lin, J. S., Xu, R., & Runt, J. (2001) · Macromolecules · doi:10.1021/ma001125r · Cited by 148
Self-citationScarfato, P., Maio, L. D., & Incarnato, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42597 · Cited by 150
Spectroscopic and thermal analyses of α′ and α crystalline forms of poly(l-lactic acid)
Kalish, J. P., Aou, K., Yang, X., & Hsu, S. L. (2010) · Polymer · doi:10.1016/j.polymer.2010.12.042 · Cited by 150
Cicero, J. A., & Dorgan, J. R. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1016012818800 · Cited by 140
Ying-Chen, Z., Wu, H., & Qiu, Y. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.007 · Cited by 137
Spherulite growth of l-lactide copolymers: Effects of tacticity and comonomers
Tsuji, H., Tezuka, Y., Saha, S. K., Suzuki, M., & Itsuno, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.069 · Cited by 146
Bouapao, L., Tsuji, H., Tashiro, K., Zhang, J., & Hanesaka, M. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.040 · Cited by 131
Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties
Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.01.014 · Cited by 137
Persano, L., Camposeo, A., Matino, F., Wang, R., Thiyagarajan, N., Li, Q., Pan, M., Su, Y., Kar‐Narayan, S., Auricchio, F., et al. (2024) · Advanced Materials · doi:10.1002/adma.202405363 · Cited by 124
Morphological behaviour of poly(lactic acid) during hydrolytic degradation
Zhang, X., Espiritu, M., Bilyk, A., & Kurniawan, L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.06.007 · Cited by 115
Poly(l-lactide)/starch blends compatibilized with poly(l-lactide)-g-starch copolymer
Chen, L., Qiu, X., Xie, Z., Hong, Z., Sun, J., Chen, X., & Jing, X. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.12.029 · Cited by 109
Tsuji, H., Ikarashi, K., & Fukuda, N. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.01.010 · Cited by 110
Pyda, M., & Wunderlich, B. (2005) · Macromolecules · doi:10.1021/ma051611k · Cited by 104
Tsuji, H., & Ikarashi, K. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.053 · Cited by 113
Wang, L., Jing, X., Cheng, H., Hu, X., Yang, L., & Huang, Y. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300526u · Cited by 104
In vitro hydrolysis of poly(l-lactide) crystalline residues as extended-chain crystallites
Tsuji, H., & Ikarashi, K. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.03.004 · Cited by 96
Effects of molecular architecture on two‐step, melt‐spun poly(lactic acid) fibers
Cicero, J. A., Dorgan, J. R., Garrett, J. T., Runt, J. P., & Lin, J. S. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11268 · Cited by 95
Self-citationSupramolecular morphology of two‐step, melt‐spun poly(lactic acid) fibers
Cicero, J. A., Dorgan, J. R., Janzen, J., Garrett, J. T., Runt, J. P., & Lin, J. S. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11267 · Cited by 90
Self-citationIndustrial Production of High Molecular Weight Poly(Lactic Acid)
Södergård, A., & Stolt, M. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch3 · Cited by 121
Huang, Y., Hung, W., Liao, M., Tsai, T., Peng, Y., & Lin, C. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23314 · Cited by 86
Stereocomplexation in Cyclic and Linear Polylactide Blends
Shin, E. J., Jones, A. E., & Waymouth, R. M. (2011) · Macromolecules · doi:10.1021/ma202184j · Cited by 91
Cho, J., Baratian, S., Kim, J., Yeh, F., Hsiao, B. S., & Runt, J. P. (2002) · Polymer · doi:10.1016/s0032-3861(02)00823-6 · Cited by 83
Self-citationSung, C.-Y., Li, C.-Y., Su, J.-K., Chen, T.-Y., Lin, C., & Ko, B. (2011) · Dalton Transactions · doi:10.1039/c1dt11461a · Cited by 81
Liu, J., Huihua, J., & Chen, L. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0438-1 · Cited by 80
Mahendrasingam, A., Blundell, D. J., Parton, M., Wright, A. K., Rasburn, J., Narayanan, T., & Fuller, W. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.081 · Cited by 78
Kinetics of Nucleation and Growth of Crystals of Poly(l-lactic acid)
Androsch, R., Schick, C. H., & Lorenzo, M. L. D. (2017) · Advances in polymer science · doi:10.1007/12_2016_13 · Cited by 85
New approach to the double melting peak of poly( l -lactic acid) observed by DSC
Gracia‐Fernández, C., Gómez-Barreiro, S., López‐Beceiro, J., Naya, S., & Artiaga, R. (2012) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2012.57 · Cited by 75
Poly( l -lactide) microspheres with controlled crystallinity
Sosnowski, S. (2001) · Polymer · doi:10.1016/s0032-3861(00)00362-1 · Cited by 80
Song, X., Ling, F., Ma, L., Yang, C., & Chen, X. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.02.014 · Cited by 75
Ojijo, V. O., Malwela, T., Ray, S. S., & Sadiku, E. R. (2011) · Polymer · doi:10.1016/j.polymer.2011.12.007 · Cited by 71
Mechanical, thermal, and dielectric properties of poly(lactic acid)/chitosan nanocomposites
Elsawy, M. A., Saad, G. R., & Sayed, A. M. (2016) · Polymer Engineering and Science · doi:10.1002/pen.24328 · Cited by 69
Studies on crystallization kinetics of bimodal long chain branched polylactides
Bai, J., Fang, H., Zhang, Y., & Wang, Z. (2014) · CrystEngComm · doi:10.1039/c3ce42319k · Cited by 67
Kovalcik, A., Pérez‐Camargo, R. A., Fürst, C., Kucharczyk, P., & Müller, A. J. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.07.009 · Cited by 65
Tsuji, H. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch21 · Cited by 67
Ren, J., & Adachi, K. (2003) · Macromolecules · doi:10.1021/ma034420v · Cited by 67
Crystallization behaviour of poly(butylene succinate) copolymers
Park, J. W., Kim, D. K., & Im, S. S. (2002) · Polymer International · doi:10.1002/pi.848 · Cited by 64
Androsch, R., & Schick, C. H. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b03022 · Cited by 63
Stoclet, G., Séguéla, R., Lefebvre, J., Li, S., & Vert, M. (2011) · Macromolecules · doi:10.1021/ma200469t · Cited by 66
Crystallization and thermal behaviour of optically pure polylactides and their blends
Sarasua, J.-R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-1204-8 · Cited by 72
Malmgren, T., Mays, J., & Pyda, M. (2006) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-005-7066-0 · Cited by 61
Canetti, M., Cacciamani, A., & Bertini, F. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23544 · Cited by 60
Crystallization behavior of linear 1-arm and 2-arm poly(l-lactide)s: Effects of coinitiators
Tsuji, H., Sugiura, Y., Sakamoto, Y., Bouapao, L., & Itsuno, S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.029 · Cited by 57
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.031 · Cited by 59
Crystal Growth and Solid-State Structure of Poly(lactide) Stereocopolymers
Abe, H., Harigaya, M., Kikkawa, Y., Tsuge, T., & Doi, Y. (2004) · Biomacromolecules · doi:10.1021/bm049497l · Cited by 54
New Polylactide-Based Materials by Chemical Crosslinking of PLA
Bednarek, M., Borská, K., & Kubisa, P. (2020) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2020.1855194 · Cited by 53
“It has been found that optical purity of 72–75% is required for the crystallization process([8]) although polymer with good mechanical properties is synthesized from L,L-”
BackgroundRadjabian, M., Kish, M. H., & Mohammadi, N. (2012) · Journal of Polymer Research · doi:10.1007/s10965-012-9870-0 · Cited by 51
Nonisothermal crystallization kinetics of poly(lactide)—effect of plasticizers and nucleating agent
Courgneau, C., Ducruet, V., Avérous, L., Grenet, J., & Domenek, S. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23357 · Cited by 52
Kanchanasopa, M., & Runt, J. P. (2004) · Macromolecules · doi:10.1021/ma035597s · Cited by 47
Self-citationShear-induced nonisothermal crystallization of two grades of PLA
Bojda, J., & Piórkowska, E. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.01.006 · Cited by 46
Homocrystal and stereocomplex formation behavior of polylactides with different branched structures
Nouri, S., Dubois, C., & Lafleur, P. G. (2015) · Polymer · doi:10.1016/j.polymer.2015.04.065 · Cited by 45
Effect of molar mass on enthalpy relaxation and crystal nucleation of poly (l-lactic acid)
Androsch, R., Lorenzo, M. L. D., & Schick, C. H. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.058 · Cited by 46
Steady–shear‐induced Isothermal Crystallization of Poly( L ‐lactide) (PLLA)
Li, X., Li, Z., Zhong, G., & Li, L. (2008) · Journal of Macromolecular Science Part B · doi:10.1080/00222340801955313 · Cited by 47
“As expected, the crystallization of PLLA under quiescent conditions is similar to the normal semicrystalline polymers’ crystallization behavior, mainly depending on temperature.([20,21]) In quiescent conditions, Tc does not affect the crystalline morphology and structure of Figure 1.”
BackgroundAnuar, H., Izzati, A. B. N. F., Inani, S. M. S. N., E’zzati, M. A. S. N., Salimah, A. B. S. M., Ali, F. B., & Manshor, M. R. (2017) · Journal of Packaging Technology and Research · doi:10.1007/s41783-017-0022-1 · Cited by 43
Characteristics and Applications of PLA
Domenek, S., & Ducruet, V. (2016) · Wiley eBooks · doi:10.1002/9781119117360.ch6 · Cited by 40
Song, P., Chen, G., Wei, Z., Zhang, W., & Liang, J. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2502-4 · Cited by 39
Sarikhani, K., Nasseri, R., Lotocki, V., Thompson, R. B., Park, C. B., & Chen, P. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.019 · Cited by 40
Wang, W., Ping, P., Chen, X., & Jing, X. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26039 · Cited by 40
Kanchanasopa, M., Manias, E., & Runt, J. P. (2003) · Biomacromolecules · doi:10.1021/bm034063w · Cited by 42
Self-citationThermal Properties of Polylactides with Different Stereoisomers of Lactides Used as Comonomers
Feng, L., Zhang, B., Bian, X., Li, G., Chen, Z., & Chen, X. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00818 · Cited by 38
Tsuji, H., & Kondoh, F. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.05.016 · Cited by 36
Lan, Q., Yu, J., He, J., Maurer, F. H. J., & Zhang, J. P. (2010) · Macromolecules · doi:10.1021/ma101473r · Cited by 35
Rathi, S. R., Kalish, J. P., Coughlin, E. B., & Hsu, S. L. (2011) · Macromolecules · doi:10.1021/ma2003135 · Cited by 41
Characteristics and Applications of Poly(lactide)
Domenek, S., Courgneau, C., & Ducruet, V. (2011) · Wiley eBooks · doi:10.1002/9781118164792.ch8 · Cited by 40
Marubayashi, H., Asai, S., Hikima, T., Takata, M., & Iwata, T. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201300406 · Cited by 33
Isothermal Crystallization Kinetics of Fiber/Polylactic Acid Composites and Morphology
Liu, T., Yu, X., Yu, F., Zhao, X., Lu, A., Wang, J., Wang, X., & Liu, T. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.659309 · Cited by 32
Stereocomplexation and morphology of enantiomeric poly(lactic acid)s with moderate‐molecular‐weight
Wang, Y., & Mano, J. F. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27260 · Cited by 33
Tsuji, H., Shimizu, K., & Sato, Y. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36498 · Cited by 33
Han, L., Han, C., & Dong, L. (2012) · Polymer International · doi:10.1002/pi.4300 · Cited by 32
Metadata
- Authors
- Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S.
- Affiliations
- Oak Ridge National Laboratory (US)
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-03-24
- Volume
- 31
- Issue
- 8
- Pages
- 2593-2599
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1976405462
- Cited by
- 187
- References
- 36
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 6 · 2023: 6 · 2022: 8 · 2021: 7 · 2020: 6 · 2019: 7 · 2018: 3 · 2017: 12 · 2016: 13 · 2015: 5 · 2014: 5 · 2013: 9 · 2012: 19
- FWCI
- 2.64
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- random copolymers, copolymer crystallization, microstructure, equilibrium melting temperature, spherulitic growth rate, Lauritzen-Hoffman theory, crystal growth kinetics, Gibbs-Thomson equation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.