The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Copolymerization of n-Butyl Acrylate with Methyl Methacrylate and PMMA Macromonomers: Comparison of Reactivity Ratios in Conventional and Atom Transfer Radical Copolymerization
Abstract
The reactivity ratios of n -butyl acrylate (nBuA) with methyl methacrylate (MMA) and ω-methacryloyl-PMMA macromonomers (MM) in conventional and atom transfer radical copolymerization (ATRP) have been determined. For the copolymerization of nBuA with MMA, good agreement of the ratios is observed between conventional and controlled radical copolymerization, indicating that chemoselectivities in both processes are similar. The relative reactivity of the MM (1/ r n BuA ) in conventional copolymerization is significantly lower than that of MMA. It depends on the concentration of the comonomers but is not significantly influenced by the length of the MM. At high concentrations the relative reactivity decreases due to diffusion control of the MM addition. In ATRP the relative reactivity of the MM is much nearer to the value of MMA. This is explained by the different time scales of monomer addition in both processes: whereas the frequency for monomer addition is in the range of milliseconds for conventional polymerizations, it is in the range of seconds in ATRP; thus, diffusion control is less important here. This gives the opportunity to copolymerize at much higher concentrations than in conventional radical copolymerization. In addition, the graft copolymers obtained by ATRP have lower polydispersities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, J.-S., & Matyjaszewski, K. (1995) · Journal of the American Chemical Society · doi:10.1021/ja00125a035 · Cited by 4,622
Self-citationKato, M., Kamigaito, M., Sawamoto, M., & Higashimura, T. (1995) · Macromolecules · doi:10.1021/ma00109a056 · Cited by 3,046
Cited by
Atom Transfer Radical Polymerization
Matyjaszewski, K., & Xia, J. (2001) · Chemical Reviews · doi:10.1021/cr940534g · Cited by 7,654
Self-citationControlled/living radical polymerization: Features, developments, and perspectives
Braunecker, W. A., & Matyjaszewski, K. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.11.002 · Cited by 3,202
Self-citationGrafting: a versatile means to modify polymersTechniques, factors and applications
BHATTACHARYA, A. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.05.002 · Cited by 1,230
Macromolecular Engineering by Atom Transfer Radical Polymerization
Matyjaszewski, K., & Tsarevsky, N. V. (2014) · Journal of the American Chemical Society · doi:10.1021/ja408069v · Cited by 1,159
Self-citationGao, H., & Matyjaszewski, K. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.001 · Cited by 799
Self-citation
Metadata
- Authors
- Roos, S. G., Müller, A. H. E., & Matyjaszewski, K.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-11-20
- Volume
- 32
- Issue
- 25
- Pages
- 8331-8335
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2140379963
- Cited by
- 220
- References
- 2
- FWCI
- 5.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.