Use of Monocarboxylic Iron Derivatives in the Ring-Opening Polymerization of l-Lactide
The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
l -Lactide was ring-opening polymerized in the melt by using different organic monocarboxylic iron complexes. The complexes were those of iron and acetic acid, butyric acid, isobutyric acid, dichloroacetic acid, and trifluoroacetic acid. The polymerization temperature was in the range 170−210 °C, polymerization time between 0.5 and 25 h, and amount of catalyst added varied between 0.12 and 1.20 wt %. Iron butyrate and iron dichloroacetate complexes were low efficient catalysts in the ring-opening polymerization due to hydrolysis during the preparation. Iron acetate, iron trifluoroacetate, and iron isobutyrate complexes were efficient catalysts yielding a high molar mass poly( l -lactide) with a high monomer conversion. Under optimum conditions a poly( l -lactide) with a molar mass ( M w ) of ca. 150 000 g/mol could be prepared. Monomer conversions over 85% were obtained in many experiments. High polymerization temperatures are required though with these kinds of iron catalysts, and some racemization of the polymerization products is evident. The polymerization experiments indicate that the oxidation state of the iron has an influence on the efficiency of the catalysts and that the iron is chemically bound to the polymer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Fe(ii) acetate (Fe(OAc)2) and several other Fe(ii) carboxylates were employed for the ROP of l-lactide ((l-LA)2) in the melt.63”
From Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers (2023) · cites this paper as [63]
In the citing paper
“They required high temperatures of 190–210 °C to proceed efficiently”
From Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers (2023) · cites this paper as [63]
In the citing paper
“There was also evidence of racemisation at the required high reaction temperatures.”
From Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers (2023) · cites this paper as [63]
In the citing paper
“However, the dispersities were very broad, typically between 2.5 and 5.”
From Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers (2023) · cites this paper as [63]
In the citing paper
“could reach molar masses of up to 70 000 g mol−1 for Fe(OAc)2 and 150 000 g mol−1 for Fe(ii)isobutyrate.”
From Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers (2023) · cites this paper as [63]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Kricheldorf, H. R., Berl, M., & Scharnagl, N. (1988) · Macromolecules · doi:10.1021/ma00180a002 · Cited by 597
Polylactones: 31. Sn(II)octoate-initiated polymerization of L-lactide: a mechanistic study
Kricheldorf, H. R., Kreiser-Saunders, I., & Boettcher, C. (1995) · Polymer · doi:10.1016/0032-3861(95)93928-f · Cited by 411
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Crystallization from the melt of poly(lactide)s with different optical purities and their blends
Tsuji, H., & Ikada, Y. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021971033 · Cited by 379
Synthesis of high‐molecular‐weight poly(L‐lactide) initiated with tin 2‐ethylhexanoate
Leenslag, J. W., & Pennings, A. J. (1987) · Die Makromolekulare Chemie · doi:10.1002/macp.1987.021880804 · Cited by 290
Configurational structures of lactic acid stereocopolymers as determined by 13C{1H} n.m.r.
Chabot, F., Vert, M., Chapelle, S., & Granger, P. (1983) · Polymer · doi:10.1016/0032-3861(83)90080-0 · Cited by 234
Cytotoxicity of some catalysts commonly used in the synthesis of copolymers for biomedical use
Tanzi, M. C., Verderio, P., Lampugnani, M. G., Resnati, M., Dejana, E., & Sturani, E. (1994) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00058971 · Cited by 218
Zhang, X., MacDonald, D. A., Goosen, M. F. A., & McAuley, K. B. (1994) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1994.080321519 · Cited by 214
Kricheldorf, H. R., Boettcher, C., & Tönnes, K.-U. (1992) · Polymer · doi:10.1016/0032-3861(92)90459-a · Cited by 208
Research works printed but not linked: 6
- Dubois P., 1991, Macromol. Symp.
- Eenink M. J. D. Ph.D., 1987, The Netherlands
- Laukkanen T. Ph.D., 1997, Finland
- Södergård A., 1998, Macromol. Symp.
- Welsh J. Y., 1972, Jan 25
- 1981, CRC Handbook of Chemistry and Physics
Cited by
Items 101–142 of 142
Nouvel, C. (2002) · Publications Et Travaux Academiques de Lorraine (Universite de Lorraine) · Cited by 8
Wang, Y., Zhang, W., Wang, X., Zuo, W., Xue, X., Ma, Y., & Sun, W. (2023) · RSC Advances · doi:10.1039/d3ra05867k · Cited by 7
Zou, J., Yingzhen, Q., Su, L., Wei, Y. X., Li, Z., & Xu, H. (2018) · Macromolecular Research · doi:10.1007/s13233-019-7018-3 · Cited by 7
SURFACE AND BULK MODIFICATION OF POLY(LACTIC ACID)
Rasal, R. M. (2009) · TigerPrints (Clemson University) · Cited by 7
Modeling and Simulation of Poly Lactic Acid Polymerization
Mehta, R. (2006) · University · Cited by 7
Kirchhecker, S., Nguyen, N., Reichert, S., Lützow, K., Eselem Bungu, P. S., Jacobi von Wangelin, A., Sandl, S., & Neffe, A. T. (2023) · RSC Advances · doi:10.1039/d3ra03112h · Cited by 6
In depth investigation of the accelerated ring opening polymerization of L-lactide
Khodabakhshi, K., Ghaeni, M. H. H. A., & Ahmadi, S. (2014) · Polymer Science Series B · doi:10.1134/s156009041501008x · Cited by 6
Naolou, T., Lendlein, A., & Neffe, A. T. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00346 · Cited by 5
“These results are in agreement with the literature (Stolt and Södergård, 1999; Kricheldorf et al., 2000), in which Fe(OAc)2 catalyzed the ROP of dilactides only at elevated temperatures.”
BackgroundResultYaghobinia, Z., Ahmadi, Z., & Abdouss, M. (2019) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21665 · Cited by 4
Munzeiwa, W. A., Nyamori, V. O., & Omondi, B. O. (2022) · Transition Metal Chemistry · doi:10.1007/s11243-022-00493-9 · Cited by 4
Poly(α-hy¬droxy¬acids) as Drug Carriers
Šnejdrová, E., & Dittrich, M. (2011) · Chemické listy · Cited by 4
Effect of polymerization conditions on the polylactic acid properties
Zavrazhnov, S. A., Fomin, V. A., Beloded, L. N., & Lobaeva, T. S. (2012) · Russian Journal of Applied Chemistry · doi:10.1134/s1070427212080216 · Cited by 4
Modeling and optimization of tubular polymerization reactors
Banu, I. (2009) · theses.fr (ABES) · doi:10.70675/6f037e52zeb87z4f08z8f8fz8075e848f5ff · Cited by 4
Tissue Engineering of Esophagus
Zhu, Y., Zhou, M., & Hou, R. (2017) · InTech eBooks · doi:10.5772/intechopen.69350 · Cited by 3
Bio-based food packaging films: influence of formulation and processing on functional properties
Molinaro, S. (2013) · Institutional Research Information System (University of Udine) · Cited by 3
Films minces auto-organisés à base de copolymères à blocs de type PS-PLA
Dirany, M. (2009) · theses.fr (ABES) · doi:10.70675/a6fbd4bcz0ea1z4928zaef6z1cc9bfc80c06 · Cited by 3
Role of important parameters in ring opening polymerization of polylactide
Kaur, P., Mehta, R., & Upadhyay, S. N. (2011) · Journal of Polymer Engineering · doi:10.1515/polyeng.2011.049 · Cited by 2
FERRIC ALKOXIDES-INITIATED RING-OPENING POLYMERIZATION OF LACTIDES
Wang, X., Liao, K., Quan, D., & Wu, Q. (2006) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2006.00229 · Cited by 2
Peleias, F. S., Zeituni, C. A., Rostelato, M. E. C. M., Fechine, G. J. M., de Souza, C. D., de Mattos, F. R., Moura, E. S., Moura, J. A., Benega, M. A. G., Feher, A., et al. (2015) · Polímeros · doi:10.1590/0104-1428.1428 · Cited by 2
Badami, A. S. (2004) · VTechWorks (Virginia Tech) · Cited by 2
Courgneau, C. (2011) · theses.fr (ABES) · doi:10.70675/588abe80zdad2z45ccza5edzadfe46ce2af8 · Cited by 2
Elaboration de copolymères biorésorbables pour endoprothèse
Duval, C. (2011) · theses.fr (ABES) · doi:10.70675/389f35e0z94dez4379za6bcz9e648e317e17 · Cited by 2
Poly (Lactic Acid) Thermoplastic Composites from Renewable Materials
Khodabakhshi, K. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch43 · Cited by 1
Lowy, P. A., & Garden, J. A. (2024) · RSC Advances · doi:10.1039/d4ra07747d · Cited by 1
The syntheses and properties of poly(L-lactide)
Lian-xi, C., Jun, W., Fu, J., & Lei, J. (2002) · Wuhan University Journal of Natural Sciences · doi:10.1007/bf02828251 · Cited by 1
Polimerização por abertura de anel de monômeros cíclicos por catalisadores à base de zinco
Martins, A. D. (2020) · Lume (Universidade Federal do Rio Grande do Sul) · Cited by 1
Degée, P., & Dúbois, P. (2004) · Wiley eBooks · doi:10.1002/0471238961.polydubo.a01 · Cited by 1
Peleias, F. S. (2013) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.85.2013.tde-19082013-133927 · Cited by 1
Sambha'a, L. (2011) · theses.fr (ABES) · doi:10.70675/0f2586efze493z43baz9e39za801e660cdba · Cited by 1
Egevardt, C. (2013) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
Peleias, F. S. (2017) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.85.2017.tde-10082017-120230
Attandoh, N. W. (2014) · ResearchSpace (University of KwaZulu-Natal)
Manganese, copper and zinc catalysts in rac-lactide polymerization
Daneshmandkashani, P. (2018) · Papyrus : Institutional Repository (Université de Montréal) · doi:10.71781/11512
Iron and titanium amino-phenolate complexes in controlled alkene polymerisation
Coward, D. L. (2019) · ERA
Préparation catalytique de nouveaux matériaux polyesters et polycarbonate
Guérin, W. (2013) · theses.fr (ABES) · doi:10.70675/75ddbcc3zb894z4a9ezb2c8zb99b932d6b4f
Metadata
- Authors
- Stolt, M., & Södergård, A.
- Affiliations
- Åbo Akademi University (FI)
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-09-16
- Volume
- 32
- Issue
- 20
- Pages
- 6412-6417
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2085843225
- Cited by
- 119
- References
- 20
- Citations by year
- 2024: 1 · 2023: 5 · 2022: 4 · 2021: 2 · 2019: 5 · 2018: 9 · 2017: 8 · 2016: 6 · 2015: 6 · 2014: 6 · 2013: 4 · 2012: 6
- FWCI
- 2.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Carbon dioxide utilization in catalysis
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- L-lactide, ring-opening polymerization, iron catalysts, poly(L-lactic acid), iron acetate, polymerization temperature, monomer conversion, polymer molecular weight, racemization, iron oxidation state, melt polymerization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.