The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fabrication of Titania Nanofibers by Electrospinning
Abstract
This paper describes a procedure based on electrospinning for generating nanofibers of anatase with controllable diameters and porous structures. When an ethanol solution containing both poly(vinyl pyrrolidone) (PVP, M w ≈ 1 300 000) and titanium tetraisopropoxide was injected through a needle under a strong electrical field, composite nanofibers made of PVP and amorphous TiO 2 were formed (with lengths up to several centimeters) as a result of electrostatic jetting. These nanofibers could be subsequently converted into anatase without changing their morphology via calcination in air at 500 °C. The average diameter of these ceramic nanofibers could be controlled in the range from 20 to 200 nm by varying a number of parameters such as the ratio between PVP and titanium tetraisopropoxide, their concentrations in the alcohol solution, the strength of the electric field, and the feeding rate of the precursor solution. Both supported and free-standing mats consisting of anatase nanofibers have been successfully fabricated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environmental applications of semiconductor photocatalysis
Hoffmann, M. R., Martin, S. T., Choi, W., & Bahnemann, D. W. (1995) · Chemical Reviews · doi:10.1021/cr00033a004 · Cited by 18,495
Cited by
TiO2 photocatalysis: Design and applications
Nakata, K., & Fujishima, A. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.06.001 · Cited by 3,651
Electrospinning of Polymeric and Ceramic Nanofibers as Uniaxially Aligned Arrays
Li, D., Wang, Y., & Xia, Y. (2003) · Nano Letters · doi:10.1021/nl0344256 · Cited by 1,525
Self-citationOne‐Dimensional Composite Nanomaterials: Synthesis by Electrospinning and Their Applications
Lu, X., Wang, C., & Wei, Y. (2009) · Small · doi:10.1002/smll.200900445 · Cited by 874
Quasi-one-dimensional metal oxide materials—Synthesis, properties and applications
Lu, J. G., Chang, P., & Fan, Z. (2006) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2006.04.002 · Cited by 586
Tyagi, A., Tripathi, K. M., Singh, N., Choudhary, S., & Gupta, R. K. (2016) · RSC Advances · doi:10.1039/c6ra10488f · Cited by 554
Metadata
- Authors
- Li, D., & Xia, Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-03-13
- Volume
- 3
- Issue
- 4
- Pages
- 555-560
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2070826432
- Cited by
- 1,239
- References
- 1
- FWCI
- 21.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.