The DOI matches its Crossref record.
Mechanical Properties of Continuously Spun Fibers of Carbon Nanotubes
Abstract
We report on the mechanical properties of fibers consisting of pure carbon nanotube fibers directly spun from an aerogel formed during synthesis by chemical vapor deposition. The continuous withdrawal of product from the gas phase imparts a high commercial potential to the process, either for the production of particularly strong fibers or for the economic production of bulk quantities of carbon nanotubes. Tensile tests were performed on fibers produced from the dissociation of three different hydrocarbons, namely, ethanol, ethylene glycol, and hexane, with a range of iron (catalyst) concentrations. The conditions were chosen to lie within the range known to enable satisfactory continuous spinning, the iron concentration being varied within this range. Increasing proportions of single wall nanotubes were found as the iron concentration was decreased, conditions which also produced fibers of best strength and stiffness. The maximum tensile strength obtained was 1.46 GPa (equivalent to 0.70 N/tex assuming a density of 2.1 g/cm(3)). The experiments indicate that significant improvements in the mechanical properties can be accomplished by optimizing the process conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Donaldson, K., Aitken, R., Tran, L., Stone, V., Duffin, R., Forrest, G., & Alexander, A. (2006) · Toxicological Sciences · doi:10.1093/toxsci/kfj130 · Cited by 1,167
Recent Advances in Research on Carbon Nanotube–Polymer Composites
Byrne, M. T., & Gun'ko, Y. K. (2010) · Advanced Materials · doi:10.1002/adma.200901545 · Cited by 873
Superstructured Assembly of Nanocarbons: Fullerenes, Nanotubes, and Graphene
Li, Z., Liu, Z., Sun, H., & Gao, C. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00102 · Cited by 554
State of the Art of Carbon Nanotube Fibers: Opportunities and Challenges
Lu, W., Zu, M., Byun, J., Kim, B., & Chou, T. (2012) · Advanced Materials · doi:10.1002/adma.201104672 · Cited by 550
Ultrastrong, Stiff, and Lightweight Carbon‐Nanotube Fibers
Zhang, X., Li, Q., Holesinger, T. G., Arendt, P. N., Huang, J., Kirven, P. D., Clapp, T. G., DePaula, R. F., Liao, X., Zhao, Y., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700776 · Cited by 460
Recent Progress in Fabrication, Structure, and Properties of Carbon Fibers
Liu, Y., & Kumar, S. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705410 · Cited by 425
Carbon‐Nanotube Fibers for Wearable Devices and Smart Textiles
Di, J., Zhang, X., Yong, Z., Zhang, Y., Li, D., Li, R., & Li, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601186 · Cited by 408
Zhang, X., Lu, W., Zhou, G., & Li, Q. (2020) · Advanced Materials · doi:10.1002/adma.201902028 · Cited by 408
Strong Carbon‐Nanotube Fibers Spun from Long Carbon‐Nanotube Arrays
Zhang, X., Li, Q., Tu, Y., Li, Y., Coulter, J. Y., Zheng, L., Zhao, Y., Jia, Q., Peterson, D. E., & Zhu, Y. (2007) · Small · doi:10.1002/smll.200600368 · Cited by 392
Cao, Q., Hur, S. ‐., Zhu, Z. ‐., Sun, Y. G., Wang, C. ‐., Meitl, M. A., Shim, M., & Rogers, J. A. (2006) · Advanced Materials · doi:10.1002/adma.200501740 · Cited by 360
Kumar, A., Sharma, K., & Dixit, A. R. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04196-y · Cited by 338
Macroscopic Carbon Nanotube Assemblies: Preparation, Properties, and Potential Applications
Liu, L., Ma, W., & Zhang, Z. (2011) · Small · doi:10.1002/smll.201002198 · Cited by 323
Metadata
- Authors
- Motta, M., Li, Kinloch, I., & Windle, A.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-07-20
- Volume
- 5
- Issue
- 8
- Pages
- 1529-1533
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2039384354
- Cited by
- 191
- References
- 0
- FWCI
- 5.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.