The DOI matches its Crossref record.
Hierarchical Placement and Associated Optoelectronic Impact of Carbon Nanotubes in Polymer-Fullerene Solar Cells
Abstract
Since their discovery, carbon nanotubes (CNTs) have been considered to be promising candidates for polymer-based solar cells, but their functional incorporation and utilization in such devices have been limited due to processing bottlenecks. Here, we demonstrate the realization of controlled placement of a single-walled CNT (SWNT) monolayer network at four different positions in polymer-fullerene bulk-heterojunction (BHJ) solar cells. SWNTs were deposited by dip-coating from a hydrophilic suspension, and a very brief, largely nondestructive argon plasma treatment of the active layer was utilized for incorporation of a SWNT layer within or above it. We demonstrate that SWNTs on the hole-collection side of the active layer lead to an increase in power conversion efficiency (PCE) of the photovoltaic devices from 4 to 4.9% (under AM 1.5 G, 1.3 suns illumination). This is the highest reported PCE for polymer-based solar cells incorporating CNTs, upon consideration of expected scaling of device parameters for 1 sun illumination. We also observe that SWNTs deposited on the top of the active layer lead to major electro-optical changes in the device functionality, including an increased fluorescence lifetime of poly-3-hexylthiophene (P3HT).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35335k · Cited by 1,284
Interface Engineering for Organic Electronics
Ma, H., Yip, H., Huang, F., & Jen, A. K. ‐. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902236 · Cited by 950
Bottari, G., de la Torre, G., Guldi, D. M., & Torres, T. (2010) · Chemical Reviews · doi:10.1021/cr900254z · Cited by 825
Recent Advancement of Nanostructured Carbon for Energy Applications
Yang, Z., Ren, J., Zhang, Z., Chen, X., Guan, G., Qiu, L., Zhang, Y., & Peng, H. (2015) · Chemical Reviews · doi:10.1021/cr5006217 · Cited by 810
Punetha, V. D., Rana, S., Yoo, H. J., Chaurasia, A., McLeskey, J. T., Ramasamy, M. S., Sahoo, N. G., & Cho, J. W. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.010 · Cited by 656
Dang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Maiti, U. N., Lee, W. J., Lee, J. M., Oh, Y., Kim, J. Y., Kim, J. E., Shim, J., Han, T. H., & Kim, S. O. (2014) · Advanced Materials · doi:10.1002/adma.201303265 · Cited by 544
Sgobba, V., & Guldi, D. M. (2009) · Chem. Soc. Rev. · doi:10.1039/b802652c · Cited by 536
Laminated Carbon Nanotube Networks for Metal Electrode-Free Efficient Perovskite Solar Cells
Li, Z., Kulkarni, S. A., Boix, P. P., Shi, E., Cao, A., Fu, K., Batabyal, S. K., Zhang, J., Xiong, Q., Wong, L. H., et al. (2014) · ACS Nano · doi:10.1021/nn501096h · Cited by 492
The role of buffer layers in polymer solar cells
Po, R., Carbonera, C., Bernardi, A., & Camaioni, N. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00273a · Cited by 480
Polymer solar cells: Recent development and possible routes for improvement in the performance
Cai, W., Gong, X., & Cao, Y. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.10.005 · Cited by 463
Mazari, S. A., Ali, E., Abro, R., Khan, F. S. A., Ahmed, I., Ahmed, M., Nizamuddin, S., Siddiqui, T. H., Hossain, N., Mubarak, N. M., et al. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105028 · Cited by 316
Metadata
- Authors
- Chaudhary, S., Lu, H., Müller, A. M., Bardeen, C. J., & Ozkan, M.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-06-15
- Volume
- 7
- Issue
- 7
- Pages
- 1973-1979
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W1985031962
- Cited by
- 188
- References
- 0
- FWCI
- 17.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.