The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Creation and Control of Two-Dimensional Electron Gas Using Al-Based Amorphous Oxides/SrTiO3 Heterostructures Grown by Atomic Layer Deposition
Open accessAbstract
The formation of a two-dimensional electron gas (2-DEG) using SrTiO(3) (STO)-based heterostructures provides promising opportunities in oxide electronics. We realized the formation of 2-DEG using several amorphous layers grown by the atomic layer deposition (ALD) technique at 300 °C which is a process compatible with mass production and thereby can provide the realization of potential applications. We found that the amorphous LaAlO(3) (LAO) layer grown by the ALD process can generate 2-DEG (∼1 × 10(13)/cm(2)) with an electron mobility of 4-5 cm(2)/V·s. A much higher electron mobility was observed at lower temperatures. More remarkably, amorphous YAlO(3) (YAO) and Al(2)O(3) layers, which are not polar-perovskite-structured oxides, can create 2-DEG as well. 2-DEG was created by means of the important role of trimethylaluminum, Me(3)Al, as a reducing agent for STO during LAO and YAO ALD as well as the Al(2)O(3) ALD process at 300 °C. The deposited oxide layer also plays an essential role as a catalyst that enables Me(3)Al to reduce the STO. The electrons were localized very near to the STO surface, and the source of carriers was explained based on the oxygen vacancies generated in the STO substrate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The surface science of titanium dioxide
Diebold, U. (2003) · Surface Science Reports · doi:10.1016/s0167-5729(02)00100-0 · Cited by 7,944
Goldstein, D. N., McCormick, J. A., & George, S. M. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp804296a · Cited by 330
Cited by
Vacancies in functional materials for clean energy storage and harvesting: the perfect imperfection
Li, G., Blake, G. R., & Palstra, T. T. M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00571c · Cited by 336
Physics of SrTiO3-based heterostructures and nanostructures: a review
Pai, Y.-Y., Tylan-Tyler, A., Irvin, P., & Levy, J. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aa892d · Cited by 309
Metadata
- Authors
- Lee, S. W., Liu, Y., Heo, J., & Gordon, R. G.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-08-28
- Volume
- 12
- Issue
- 9
- Pages
- 4775-4783
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2118532444
- Cited by
- 169
- References
- 2
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.