The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Strain Engineering of Kapitza Resistance in Few-Layer Graphene
Abstract
We demonstrate through molecular dynamics simulations that the Kapitza resistance in few-layer graphene (FLG) can be controlled by applying mechanical strain. For unstrained FLG, the Kapitza resistance decreases with the increase of thickness and reaches an asymptotic value of 6 × 10(-10) m(2)K/W at a thickness about 16 nm. Uniaxial cross-plane strain is found to increase the Kapitza resistance in FLG monotonically, when the applied strain varies from compressive to tensile. Moreover, uniaxial strain couples the in-plane and out-of-plane strain/stress when the surface of FLG is buckled. We find that with a compressive cross-plane stress of 2 GPa, the Kapitza resistance is reduced by about 50%. On the other hand it is almost tripled with a tensile cross-plane stress of 1 GPa. Remarkably, compressive in-plane strain can either increase or reduce the Kapitza resistance, depending on the specific way it is applied. Our study suggests that graphene can be exploited for both heat dissipation and insulation through strain engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Cited by
Size-dependent phononic thermal transport in low-dimensional nanomaterials
Zhang, Z., Ouyang, Y., Cheng, Y., Chen, J., Li, N., & Zhang, G. (2020) · Physics Reports · doi:10.1016/j.physrep.2020.03.001 · Cited by 341
Self-citationRecent progress on graphene-analogous 2D nanomaterials: Properties, modeling and applications
Liu, B., & Zhou, K. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.09.004 · Cited by 329
Thermal Conductivity of Amorphous Materials
Zhou, W., Cheng, Y., Chen, K., Xie, G., Wang, T., & Zhang, G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903829 · Cited by 323
Phonon thermal conduction in novel 2D materials
Xu, X., Chen, J., & Li, B. (2016) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/28/48/483001 · Cited by 137
Self-citation
Metadata
- Authors
- Chen, J., Walther, J. H., & Koumoutsakos, P.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-22
- Volume
- 14
- Issue
- 2
- Pages
- 819-825
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2330917529
- Cited by
- 166
- References
- 1
- FWCI
- 6.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Strain Engineering of Kapitza Resistance in Few-Layer Graphene. https://app.cochat.ai/papers/10.1021/nl404182k
- The paper
- Chen, J., Walther, J. H., & Koumoutsakos, P. (2014). Strain Engineering of Kapitza Resistance in Few-Layer Graphene. Nano Letters. https://doi.org/10.1021/nl404182k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.