The DOI matches its Crossref record.
MoS2 Transistors Operating at Gigahertz Frequencies
Open accessAbstract
The presence of a direct band gap and an ultrathin form factor has caused a considerable interest in two-dimensional (2D) semiconductors from the transition metal dichalcogenides (TMD) family with molybdenum disulfide (MoS2) being the most studied representative of this family of materials. While diverse electronic elements, logic circuits, and optoelectronic devices have been demonstrated using ultrathin MoS2, very little is known about their performance at high frequencies where commercial devices are expected to function. Here, we report on top-gated MoS2 transistors operating in the gigahertz range of frequencies. Our devices show cutoff frequencies reaching 6 GHz. The presence of a band gap also gives rise to current saturation, allowing power and voltage gain, all in the gigahertz range. This shows that MoS2 could be an interesting material for realizing high-speed amplifiers and logic circuits with device scaling expected to result in further improvement of performance. Our work represents the first step in the realization of high-frequency analog and digital circuits based on 2D semiconductors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Self-citationElectrical contacts to two-dimensional semiconductors
Allain, A., Kang, J., Banerjee, K., & Kis, A. (2015) · Nature Materials · doi:10.1038/nmat4452 · Cited by 1,859
Self-citationRecent Progress and Future Prospects of 2D‐Based Photodetectors
Huo, N., & Konstantatos, G. (2018) · Advanced Materials · doi:10.1002/adma.201801164 · Cited by 730
Two-dimensional materials and their prospects in transistor electronics
Schwierz, F., Pezoldt, J., & Granzner, R. (2015) · Nanoscale · doi:10.1039/c5nr01052g · Cited by 726
Lembke, D., Bertolazzi, S., & Kis, A. (2015) · Accounts of Chemical Research · doi:10.1021/ar500274q · Cited by 546
Self-citationSamadi, M., Sarikhani, N., Zirak, M., Zhang, H., Zhang, H.-L., & Moshfegh, A. Z. (2018) · Nanoscale Horizons · doi:10.1039/c7nh00137a · Cited by 408
Black Phosphorus Radio-Frequency Transistors
Wang, H., Wang, X., Xia, F., Wang, L., Jiang, H., Xia, Q., Chin, M. L., Dubey, M., & Han, S.-J. (2014) · Nano Letters · doi:10.1021/nl5029717 · Cited by 330
Atomically Thin MoS2: A Versatile Nongraphene 2D Material
Venkata Subbaiah, Y. P., Saji, K. J., & Tiwari, A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504202 · Cited by 289
Ruzmetov, D., Zhang, K., Stan, G., Kalanyan, B., Bhimanapati, G. R., Eichfeld, S. M., Burke, R. A., Shah, P. B., O’Regan, T. P., Crowne, F. J., et al. (2016) · ACS Nano · doi:10.1021/acsnano.5b08008 · Cited by 260
Metadata
- Authors
- Krasnozhon, D., Lembke, D., Nyffeler, C., Leblebici, Y., & Kis, A.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-09-22
- Volume
- 14
- Issue
- 10
- Pages
- 5905-5911
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2149307116
- Cited by
- 190
- References
- 0
- FWCI
- 12.36
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.