The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ordered Arrays of Vertically Aligned [110] Silicon Nanowires by Suppressing the Crystallographically Preferred <100> Etching Directions
Abstract
The metal-assisted etching direction of Si(110) substrates was found to be dependent upon the morphology of the deposited metal catalyst. The etching direction of a Si(110) substrate was found to be one of the two crystallographically preferred 100 directions in the case of isolated metal particles or a small area metal mesh with nanoholes. In contrast, the etching proceeded in the vertical [110] direction, when the lateral size of the catalytic metal mesh was sufficiently large. Therefore, the direction of etching and the resulting nanostructures obtained by metal-assisted etching can be easily controlled by an appropriate choice of the morphology of the deposited metal catalyst. On the basis of this finding, a generic method was developed for the fabrication of wafer-scale vertically aligned arrays of epitaxial [110] Si nanowires on a Si(110) substrate. The method utilized a thin metal film with an extended array of pores as an etching catalyst based on an ultrathin porous anodic alumina mask, while a prepatterning of the substrate prior to the metal depostion is not necessary. The diameter of Si nanowires can be easily controlled by a combination of the pore diameter of the porous alumina film and varying the thickness of the deposited metal film.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhanced thermoelectric performance of rough silicon nanowires
Hochbaum, A. I., Chen, R., Delgado, R. D., Liang, W., Garnett, E. C., Najarian, M., Majumdar, A., & Yang, P. (2008) · Nature · doi:10.1038/nature06381 · Cited by 4,109
Cited by
Metal‐Assisted Chemical Etching of Silicon: A Review: In memory of Prof. Ulrich Gösele
Huang, Z., Geyer, N., Werner, P., de Boor, J., & Gösele, U. (2011) · Advanced Materials · doi:10.1002/adma.201001784 · Cited by 1,909
Self-citationMetal-assisted chemical etching of silicon and nanotechnology applications
Han, H., Huang, Z., & Lee, W. (2014) · Nano Today · doi:10.1016/j.nantod.2014.04.013 · Cited by 460
Self-citationElectrically Conductive and Optically Active Porous Silicon Nanowires
Qu, Y., Liao, L., Li, Y., Zhang, H., Huang, Y., & Duan, X. (2009) · Nano Letters · doi:10.1021/nl903030h · Cited by 345
Metadata
- Authors
- Huang, Z., Shimizu, T., Senz, S., Zhang, Z., Zhang, X., Lee, W., Geyer, N., & Gösele, U.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-05-29
- Volume
- 9
- Issue
- 7
- Pages
- 2519-2525
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2151843483
- Cited by
- 183
- References
- 1
- FWCI
- 7.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.