The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Light-Weight Flexible Carbon Nanotube Based Organic Composites with Large Thermoelectric Power Factors
Abstract
Typical organic materials have low thermal conductivities that are best suited to thermoelectrics, but their poor electrical properties with strong adverse correlations have prevented them from being feasible candidates. Our composites, containing single-wall carbon nanotubes, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and/or polyvinyl acetate, show thermopowers weakly correlated with electrical conductivities, resulting in large thermoelectric power factors in the in-plane direction of the composites, ∼160 μW/m·K(2) at room temperature, which are orders of magnitude larger than those of typical polymer composites. Furthermore, their high electrical conductivities, ∼10(5) S/m at room temperature, make our composites very promising for various electronic applications. The optimum nanotube concentrations for better power factors were identified to be 60 wt % with 40 wt % polymers. It was noticed that high nanotube concentrations above 60 wt % decreased the electrical conductivity of the composites due to less effective nanotube dispersions. The thermal conductivities of our 60 wt % nanotube composites in the out-of-plane direction were measured to be 0.2-0.4 W/m·K at room temperature. The in-plane thermal conductivity and thermal contact conductance between nanotubes were also theoretically estimated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Thin-film thermoelectric devices with high room-temperature figures of merit
Venkatasubramanian, R., Siivola, E., Colpitts, T., & O'Quinn, B. (2001) · Nature · doi:10.1038/35098012 · Cited by 5,205
Extreme Oxygen Sensitivity of Electronic Properties of Carbon Nanotubes
Collins, P. G., Bradley, K., Ishigami, M., & Zettl, A. (2000) · Science · doi:10.1126/science.287.5459.1801 · Cited by 2,974
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Electrical conductivity of individual carbon nanotubes
Ebbesen, T. W., Lezec, H. J., Hiura, H., Bennett, J. W., Ghaemi, H. F., & Thio, T. (1996) · Nature · doi:10.1038/382054a0 · Cited by 2,642
Thermal Conductance of an Individual Single-Wall Carbon Nanotube above Room Temperature
Pop, E., Mann, D., Wang, Q., Goodson, K., & Dai, H. (2006) · Nano Letters · doi:10.1021/nl052145f · Cited by 1,852
Thermal conductivity of single-walled carbon nanotubes
Hone, J., Whitney, M., Piskoti, C., & Zettl, A. (1999) · Physical Review B · doi:10.1103/physrevb.59.r2514 · Cited by 1,188
Kim, J. Y., Jung, J. H., Lee, D. E., & Joo, J. (2002) · Synthetic Metals · doi:10.1016/s0379-6779(01)00576-8 · Cited by 1,072
Thermoelectricity in Semiconductor Nanostructures
Majumdar, A. (2004) · Science · doi:10.1126/science.1093164 · Cited by 981
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Organic thermoelectric materials for energy harvesting and temperature control
Russ, B., Glaudell, A., Urban, J. J., Chabinyc, M. L., & Segalman, R. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.50 · Cited by 1,296
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Conductive polymer composites with segregated structures
Pang, H., Xu, L., Yan, D.-X., & Li, Z.-M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.07.007 · Cited by 802
Flexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Carbon‐Nanotube‐Based Thermoelectric Materials and Devices
Blackburn, J. L., Ferguson, A. J., Cho, C., & Grunlan, J. C. (2018) · Advanced Materials · doi:10.1002/adma.201704386 · Cited by 684
Self-citationDeng, H., Lin, L., Ji, M., Zhang, S., Yang, M., & Fu, Q. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.007 · Cited by 652
Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices
Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., Isikgor, F. H., & Ouyang, J. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-2895-5 · Cited by 648
Flexible thermoelectric materials and device optimization for wearable energy harvesting
Bahk, J.-H., Fang, H., Yazawa, K., & Shakouri, A. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01644d · Cited by 621
Thermoelectrics: From history, a window to the future
Beretta, D., Neophytou, N., Hodges, J. M., Kanatzidis, M. G., Narducci, D., Martin- Gonzalez, M., Beekman, M., Balke, B., Cerretti, G., Tremel, W., et al. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.09.001 · Cited by 606
Thermoelectric plastics: from design to synthesis, processing and structure–property relationships
Kroon, R., Mengistie, D. A., Kiefer, D., Hynynen, J., Ryan, J. D., Yu, L., & Müller, C. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00149a · Cited by 577
Recent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
Mehdizadeh Dehkordi, A., Zebarjadi, M., He, J., & Tritt, T. M. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.08.001 · Cited by 493
Towards high-performance polymer-based thermoelectric materials
He, M., Qiu, F., & Lin, Z. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24193a · Cited by 458
Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications
Massetti, M., Jiao, F., Ferguson, A. J., Zhao, D., Wijeratne, K., Würger, A., Blackburn, J. L., Crispin, X., & Fabiano, S. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00218 · Cited by 456
Thermoelectric Properties of PEDOT:PSS
Fan, Z., & Ouyang, J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800769 · Cited by 448
Yoo, D., Kim, J., & Kim, J. H. (2014) · Nano Research · doi:10.1007/s12274-014-0433-z · Cited by 444
Park, T., Park, C., Kim, B., Shin, H., & Kim, E. (2013) · Energy & Environmental Science · doi:10.1039/c3ee23729j · Cited by 443
Solution processed organic thermoelectrics: towards flexible thermoelectric modules
Chen, Y., Zhao, Y., & Liang, Z. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03297g · Cited by 428
Kim, M., Lee, C., & Jang, J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303282 · Cited by 420
Nonoguchi, Y., Ohashi, K., Kanazawa, R., Ashiba, K., Hata, K., Nakagawa, T., Adachi, C., Tanase, T., & Kawai, T. (2013) · Scientific Reports · doi:10.1038/srep03344 · Cited by 390
Stretchable fabric generates electric power from woven thermoelectric fibers
Sun, T., Zhou, B., Zheng, Q., Wang, L., Jiang, W., & Snyder, G. J. (2020) · Nature Communications · doi:10.1038/s41467-020-14399-6 · Cited by 390
Zhou, W., Fan, Q., Zhang, Q., Cai, L., Li, K., Gu, X., Yang, F., Zhang, N., Wang, Y., Liu, H., et al. (2017) · Nature Communications · doi:10.1038/ncomms14886 · Cited by 385
Yao, Q., Wang, Q., Wang, L., & Chen, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01905a · Cited by 356
Tailored semiconducting carbon nanotube networks with enhanced thermoelectric properties
Avery, A. D., Zhou, B. H., Lee, J., Lee, E.-S., Miller, E. M., Ihly, R., Wesenberg, D., Mistry, K. S., Guillot, S. L., Zink, B. L., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.33 · Cited by 334
Organic Thermoelectrics: Materials Preparation, Performance Optimization, and Device Integration
Wang, H., & Yu, C. (2019) · Joule · doi:10.1016/j.joule.2018.10.012 · Cited by 320
Self-citationYang, Y., Deng, H., & Fu, Q. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00308e · Cited by 316
Rational Design of Advanced Thermoelectric Materials
Yang, J., Yip, H., & Jen, A. K. ‐. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200514 · Cited by 315
Simple Salt‐Coordinated n‐Type Nanocarbon Materials Stable in Air
Nonoguchi, Y., Nakano, M., Murayama, T., Hagino, H., Hama, S., Miyazaki, K., Matsubara, R., Nakamura, M., & Kawai, T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600179 · Cited by 305
A survey of hybrid energy devices based on supercapacitors
Gao, D., Luo, Z., Liu, C., & Fan, S. (2023) · Green Energy & Environment · doi:10.1016/j.gee.2022.02.002 · Cited by 301
Polymer based thermoelectric nanocomposite materials and devices: Fabrication and characteristics
Nandihalli, N., Liu, C.-J., & Mori, T. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105186 · Cited by 293
Nanoengineering thermoelectrics for 21st century: Energy harvesting and other trends in the field
Martín-González, M., Caballero-Calero, O., & Díaz-Chao, P. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.008 · Cited by 291
Recent Development of Thermoelectric Polymers and Composites
Yao, H., Fan, Z., Cheng, H., Guan, X., Wang, C., Sun, K., & Ouyang, J. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700727 · Cited by 291
Oh, J. Y., Lee, J. H., Han, S. W., Chae, S. S., Bae, E. J., Kang, Y. H., Choi, W. J., Cho, S. Y., Lee, J.-O., Baik, H. K., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03813h · Cited by 289
Polymer Composites for Thermoelectric Applications
McGrail, B. T., Sehirlioglu, A., & Pentzer, E. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201408431 · Cited by 287
Cho, C., Wallace, K. L., Tzeng, P., Hsu, J., Yu, C., & Grunlan, J. C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502168 · Cited by 286
Self-citationJu, H., & Kim, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b07355 · Cited by 286
Carbon and carbon composites for thermoelectric applications
Zhang, Y., Zhang, Q., & Chen, G. (2020) · Carbon Energy · doi:10.1002/cey2.68 · Cited by 278
Functionalized Cellulose for Water Purification, Antimicrobial Applications, and Sensors
Bethke, K., Palantöken, S., Andrei, V., Roß, M., Raghuwanshi, V. S., Kettemann, F., Greis, K., Ingber, T. T. K., Stückrath, J. B., Valiyaveettil, S., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800409 · Cited by 269
Thermal Transport in Conductive Polymer–Based Materials
Xu, X., Zhou, J., & Chen, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904704 · Cited by 224
Metadata
- Authors
- Yu, C., Choi, K., Yin, L., & Grunlan, J. C.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-09-19
- Volume
- 5
- Issue
- 10
- Pages
- 7885-7892
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2005397745
- Cited by
- 454
- References
- 28
- FWCI
- 10.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.