The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Hole Transport Materials with Low Glass Transition Temperatures and High Solubility for Application in Solid-State Dye-Sensitized Solar Cells
Abstract
We present the synthesis and device characterization of new hole transport materials (HTMs) for application in solid-state dye-sensitized solar cells (ssDSSCs). In addition to possessing electrical properties well suited for ssDSSCs, these new HTMs have low glass transition temperatures, low melting points, and high solubility, which make them promising candidates for increased pore filling into mesoporous titania films. Using standard device fabrication methods and Z907 as the sensitizing dye, power conversion efficiencies (PCE) of 2.94% in 2-μm-thick cells were achieved, rivaling the PCE obtained by control devices using the state-of-the-art HTM spiro-OMeTAD. In 6-μm-thick cells, the device performance is shown to be higher than that obtained using spiro-OMeTAD, making these new HTMs promising for preparing high-efficiency ssDSSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Cited by
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Self-citationDye-Sensitized Solar Cells: Fundamentals and Current Status
Sharma, K., Sharma, V., & Sharma, S. S. (2018) · Nanoscale Research Letters · doi:10.1186/s11671-018-2760-6 · Cited by 1,084
Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells
Rombach, F. M., Haque, S. A., & Macdonald, T. J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02095a · Cited by 730
Abate, A., Leijtens, T., Pathak, S., Teuscher, J., Avolio, R., Errico, M. E., Kirkpatrik, J., Ball, J. M., Docampo, P., McPherson, I., et al. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44397j · Cited by 674
Self-citationTriarylamine: Versatile Platform for Organic, Dye-Sensitized, and Perovskite Solar Cells
Wang, J., Liu, K., Ma, L., & Zhan, X. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00432 · Cited by 536
Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Kim, H., Lim, K.-G., & Lee, T.-W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02194d · Cited by 507
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Xu, B., Sheibani, E., Liu, P., Zhang, J., Tian, H., Vlachopoulos, N., Boschloo, G., Kloo, L., Hagfeldt, A., & Sun, L. (2014) · Advanced Materials · doi:10.1002/adma.201402415 · Cited by 414
A Simple 3,4‐Ethylenedioxythiophene Based Hole‐Transporting Material for Perovskite Solar Cells
Li, H., Fu, K., Hagfeldt, A., Grätzel, M., Mhaisalkar, S. G., & Grimsdale, A. C. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201310877 · Cited by 405
Agarwala, P., & Kabra, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08449d · Cited by 384
Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells
Hossain, M. I., Alharbi, F. H., & Tabet, N. (2015) · Solar Energy · doi:10.1016/j.solener.2015.07.040 · Cited by 377
Malinauskas, T., Tomkute-Luksiene, D., Sens, R., Daskeviciene, M., Send, R., Wonneberger, H., Jankauskas, V., Bruder, I., & Getautis, V. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5090385 · Cited by 368
Gratia, P., Magomedov, A., Malinauskas, T., Daskeviciene, M., Abate, A., Ahmad, S., Grätzel, M., Getautis, V., & Nazeeruddin, M. K. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504666 · Cited by 264
Metadata
- Authors
- Leijtens, T., Ding, I.-K., Giovenzana, T., Bloking, J. T., McGehee, M. D., & Sellinger, A.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-01-24
- Volume
- 6
- Issue
- 2
- Pages
- 1455-1462
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2133203942
- Cited by
- 333
- References
- 1
- FWCI
- 13.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
