The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Intrinsic Strength and Failure Behaviors of Graphene Grain Boundaries
Abstract
As one-dimension line defects, grain boundaries (GBs) can affect many intrinsic properties of graphene. In this paper, the mechanical properties of 20 representative graphene grain boundaries were studied using density functional theory and molecular dynamics. With different arrangements of the pentagonal and heptagonal rings, the grain boundary may remain flat or become inflected up to 72°. For the flat GBs, the intrinsic tensile strength decreases linearly with the formation energy with a maximum value of 93 GPa, close to that of a perfect graphene. The intrinsic tensile strength of the inflected GBs is found to generally decrease with increasing inflection angle. Stone-Wales transformation is identified as the major failure mechanism of graphene GBs at high temperatures, whereas the initial fracture site can be either on the boundary line or inside the domain. These theoretical results constitute a useful picture of the grain boundary effect on the mechanical properties of polycrystalline graphene.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Cited by
A review on mechanics and mechanical properties of 2D materials—Graphene and beyond
Akinwande, D., Brennan, C. J., Bunch, J. S., Egberts, P., Felts, J. R., Gao, H., Huang, R., Kim, J.-S., Li, T., Li, Y., et al. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.01.008 · Cited by 1,342
High-Strength Chemical-Vapor–Deposited Graphene and Grain Boundaries
Lee, G.-H., Cooper, R. C., An, S. J., Lee, S., van der Zande, A., Petrone, N., Hammerberg, A. G., Lee, C., Crawford, B., Oliver, W., et al. (2013) · Science · doi:10.1126/science.1235126 · Cited by 889
Pakdel, A., Bando, Y., & Golberg, D. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60260e · Cited by 809
Structure of graphene and its disorders: a review
Yang, G., Li, L., Lee, W. B., & Ng, M. C. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1494493 · Cited by 759
Elastic straining of free-standing monolayer graphene
Cao, K., Feng, S., Han, Y., Gao, L., Hue Ly, T., Xu, Z., & Lu, Y. (2020) · Nature Communications · doi:10.1038/s41467-019-14130-0 · Cited by 451
Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration
Lee, J.-H., Loya, P. E., Lou, J., & Thomas, E. L. (2014) · Science · doi:10.1126/science.1258544 · Cited by 442
Mechanical properties of graphene oxides
Liu, L., Zhang, J., Zhao, J., & Liu, F. (2012) · Nanoscale · doi:10.1039/c2nr31164j · Cited by 335
Self-citationGrain-size dependent mechanical behavior of nanocrystalline metals
Hahn, E. N., & Meyers, M. A. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.07.075 · Cited by 263
Metadata
- Authors
- Zhang, J., Zhao, J., & Lu, J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-03-07
- Volume
- 6
- Issue
- 3
- Pages
- 2704-2711
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2324788358
- Cited by
- 231
- References
- 1
- FWCI
- 13.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.