The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Olivine-Type Nanosheets for Lithium Ion Battery Cathodes
Abstract
Olivine-type LiMPO4 (M = Fe, Mn, Co, Ni) has become of great interest as cathodes for next-generation high-power lithium-ion batteries. Nevertheless, this family of compounds suffers from poor electronic conductivities and sluggish lithium diffusion in the [010] direction. Here, we develop a liquid-phase exfoliation approach combined with a solvothermal lithiation process in high-pressure high-temperature (HPHT) supercritical fluids for the fabrication of ultrathin LiMPO4 nanosheets (thickness: 3.7-4.6 nm) with exposed (010) surface facets. Importantly, the HPHT solvothermal lithiation could produce monodisperse nanosheets while the traditional high-temperature calcination, which is necessary for cathode materials based on high-quality crystals, leads the formation of large grains and aggregation of the nanosheets. The as-synthesized nanosheets have features of high contact area with the electrolyte and fast lithium transport (time diffusion constant in at the microsecond level). The estimated diffusion time for Li(+) to diffuse over a [010]-thickness of <5 nm (L) was calculated to be less than 25, 2.5, and 250 μs for LiFePO4, LiMnPO4, and LiCoPO4 nanosheets, respectively, via the equation of t = L(2)/D. These values are about 5 orders of magnitude lower than the corresponding bulk materials. This results in high energy densities and excellent rate capabilities (e.g., 18 kW kg(-1) and 90 Wh kg(-1) at a 80 C rate for LiFePO4 nanosheets).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Freestanding palladium nanosheets with plasmonic and catalytic properties
Huang, X., Tang, S., Mu, X., Dai, Y., Chen, G., Zhou, Z., Ruan, F., Yang, Z., & Zheng, N. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.235 · Cited by 1,602
Cited by
Rational material design for ultrafast rechargeable lithium-ion batteries
Tang, Y., Zhang, Y., Li, W., Ma, B., & Chen, X. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00442f · Cited by 987
Li3V2(PO4)3 cathode materials for lithium-ion batteries: A review
Rui, X., Yan, Q., Skyllas-Kazacos, M., & Lim, T. M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.126 · Cited by 342
Self-citation
Metadata
- Authors
- Rui, X., Zhao, X., Lu, Z., Tan, H., Sim, D., Hng, H. H., Yazami, R., Lim, T. M., & Yan, Q.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-05-30
- Volume
- 7
- Issue
- 6
- Pages
- 5637-5646
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W1980830368
- Cited by
- 234
- References
- 2
- FWCI
- 19.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.