The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Lithium-Doped Zinc Oxide Nanowires–Polymer Composite for High Performance Flexible Piezoelectric Nanogenerator
Abstract
We present a method to develop high performance flexible piezoelectric nanogenerators (NGs) by employing Li-doped ZnO nanowires (NWs). We synthesized Li-doped ZnO NWs and adopted them to replace intrinsic ZnO NWs with a relatively low piezoelectric coefficient. When we exploited the ferroelectric phase transition induced in Li-doped ZnO NWs, the performance of the NGs was significantly improved and the NG fabrication process was greatly simplified. In addition, our approach can be easily expanded for large-scale NG fabrication. Consequently, the NGs fabricated by our simple method exhibit the excelling output voltage and current, which are stable and reproducible during periodic bending/releasing measurement over extended cycles. In addition, output voltage and current up to ∼ 180 V and ∼ 50 μA, respectively, were obtained in the large-scale NG. The approach introduced here extends the performance limits of ZnO-based NGs and their potentials in practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays
Wang, Z. L., & Song, J. (2006) · Science · doi:10.1126/science.1124005 · Cited by 7,922
Cited by
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“In addition to silver, Shih et al in 2014 [117] demonstrated the use of lithium in nanogenerators that produced open circuit voltages as high as 180 V.”
BackgroundCui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
Flexible Molybdenum Disulfide (MoS2) Atomic Layers for Wearable Electronics and Optoelectronics
Singh, E., Singh, P., Kim, K. S., Yeom, G. Y., & Nalwa, H. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19859 · Cited by 407
Stretchable Electrospun PVDF-HFP/Co-ZnO Nanofibers as Piezoelectric Nanogenerators
Parangusan, H., Ponnamma, D., & Al-Maadeed, M. A. A. (2018) · Scientific Reports · doi:10.1038/s41598-017-19082-3 · Cited by 388
Synthesis, optimization and applications of ZnO/polymer nanocomposites
Ponnamma, D., Cabibihan, J.-J., Rajan, M., Pethaiah, S. S., Deshmukh, K., Gogoi, J. P., Pasha, S. K. K., Ahamed, M. B., Krishnegowda, J., Chandrashekar, B. N., et al. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.01.081 · Cited by 304
Piezoelectric energy harvesters for biomedical applications
Ali, F., Raza, W., Li, X., Gul, H., & Kim, K.-H. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.012 · Cited by 300
Shin, S.-H., Kwon, Y. H., Kim, Y.-H., Jung, J.-Y., Lee, M. H., & Nah, J. (2015) · ACS Nano · doi:10.1021/acsnano.5b01340 · Cited by 263
Self-citationLe, A. T., Ahmadipour, M., & Pung, S.-Y. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.156172 · Cited by 253
Metadata
- Authors
- Shin, S.-H., Kim, Y.-H., Lee, M. H., Jung, J.-Y., Seol, J. H., & Nah, J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-10-03
- Volume
- 8
- Issue
- 10
- Pages
- 10844-10850
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2328029567
- Cited by
- 161
- References
- 1
- FWCI
- 5.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.