The DOI matches its Crossref record.
Polyfluorene-Sorted, Carbon Nanotube Array Field-Effect Transistors with Increased Current Density and High On/Off Ratio
Abstract
Challenges in eliminating metallic from semiconducting single-walled carbon nanotubes (SWCNTs) and in controlling their alignment have limited the development of high-performance SWCNT-based field-effect transistors (FETs). We recently pioneered an approach for depositing aligned arrays of ultra-high-purity semiconducting SWCNTs, isolated using polyfluorene derivatives, called dose-controlled floating evaporative self-assembly. Here, we tailor FETs fabricated from these arrays to achieve on-conductance (G(on)) per width and an on-off ratio (G(on)/G(off)) of 261 μS/μm and 2 × 10(5), respectively, for a channel length (L(ch)) of 240 nm and 116 μS/μm and 1 × 10(6), respectively, for an L(ch) of 1 μm. We demonstrate 1400× greater G(on)/G(off) than SWCNT FETs fabricated by other methods, at comparable G(on) per width of ∼250 μS/μm and 30-100× greater G(on) per width at comparable G(on)/G(off) of 10(5)-10(7). The average G(on) per tube reaches 5.7 ± 1.4 μS at a packing density of 35 tubes/μm for L(ch) in the range 160-240 nm, limited by contact resistance. These gains highlight the promise of using ultra-high-purity semiconducting SWCNTs with controlled alignment for next-generation semiconductor electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Modern microprocessor built from complementary carbon nanotube transistors
Hills, G., Lau, C., Wright, A., Fuller, S., Bishop, M. D., Srimani, T., Kanhaiya, P., Ho, R., Amer, A., Stein, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1493-8 · Cited by 691
Aligned, high-density semiconducting carbon nanotube arrays for high-performance electronics
Liu, L., Han, J., Xu, L., Zhou, J., Zhao, C., Ding, S., Shi, H., Xiao, M., Ding, L., Ma, Z., et al. (2020) · Science · doi:10.1126/science.aba5980 · Cited by 638
Quasi-ballistic carbon nanotube array transistors with current density exceeding Si and GaAs
Brady, G. J., Way, A. J., Safron, N. S., Evensen, H. T., Gopalan, P., & Arnold, M. S. (2016) · Science Advances · doi:10.1126/sciadv.1601240 · Cited by 359
Self-citationTailored semiconducting carbon nanotube networks with enhanced thermoelectric properties
Avery, A. D., Zhou, B. H., Lee, J., Lee, E.-S., Miller, E. M., Ihly, R., Wesenberg, D., Mistry, K. S., Guillot, S. L., Zink, B. L., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.33 · Cited by 334
He, X., Hartmann, N. F., Ma, X., Kim, Y., Ihly, R., Blackburn, J. L., Gao, W., Kono, J., Yomogida, Y., Hirano, A., et al. (2017) · Nature Photonics · doi:10.1038/nphoton.2017.119 · Cited by 320
Bishop, M. D., Hills, G., Srimani, T., Lau, C., Murphy, D., Fuller, S., Humes, J., Ratkovich, A., Nelson, M., & Shulaker, M. M. (2020) · Nature Electronics · doi:10.1038/s41928-020-0419-7 · Cited by 282
Substrate‐Wide Confined Shear Alignment of Carbon Nanotubes for Thin Film Transistors
Jinkins, K. R., Chan, J., Jacobberger, R. M., Berson, A., & Arnold, M. S. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800593 · Cited by 45
Self-citation
Metadata
- Authors
- Brady, G. J., Joo, Y., Wu, M.-Y., Shea, M. J., Gopalan, P., & Arnold, M. S.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-11-13
- Volume
- 8
- Issue
- 11
- Pages
- 11614-11621
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2320642867
- Cited by
- 162
- References
- 0
- FWCI
- 8.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.