The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Thickness Scaling Effect on Interfacial Barrier and Electrical Contact to Two-Dimensional MoS2 Layers
Open accessAbstract
Understanding the interfacial electrical properties between metallic electrodes and low-dimensional semiconductors is essential for both fundamental science and practical applications. Here we report the observation of thickness reduction induced crossover of electrical contact at Au/MoS2 interfaces. For MoS2 thicker than 5 layers, the contact resistivity slightly decreases with reducing MoS2 thickness. By contrast, the contact resistivity sharply increases with reducing MoS2 thickness below 5 layers, mainly governed by the quantum confinement effect. We find that the interfacial potential barrier can be finely tailored from 0.3 to 0.6 eV by merely varying MoS2 thickness. A full evolution diagram of energy level alignment is also drawn to elucidate the thickness scaling effect. The finding of tailoring interfacial properties with channel thickness represents a useful approach controlling the metal/semiconductor interfaces which may result in conceptually innovative functionalities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Chemistry and Properties of Nanocrystals of Different Shapes
Burda, C., Chen, X., Narayanan, R., & El-Sayed, M. A. (2005) · Chemical Reviews · doi:10.1021/cr030063a · Cited by 7,230
Graphene–MoS2 hybrid structures for multifunctional photoresponsive memory devices
Roy, K., Padmanabhan, M., Goswami, S., Sai, T. P., Ramalingam, G., Raghavan, S., & Ghosh, A. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.206 · Cited by 1,436
Cited by
Electrical contacts to two-dimensional semiconductors
Allain, A., Kang, J., Banerjee, K., & Kis, A. (2015) · Nature Materials · doi:10.1038/nmat4452 · Cited by 1,859
Ultralow contact resistance between semimetal and monolayer semiconductors
Shen, P.-C., Su, C., Lin, Y., Chou, A.-S., Cheng, C.-C., Park, J.-H., Chiu, M.-H., Lu, A.-Y., Tang, H.-L., Tavakoli, M. M., et al. (2021) · Nature · doi:10.1038/s41586-021-03472-9 · Cited by 1,402
Self-citationFermi Level Pinning at Electrical Metal Contacts of Monolayer Molybdenum Dichalcogenides
Kim, C., Moon, I., Lee, D., Choi, M. S., Ahmed, F., Nam, S., Cho, Y., Shin, H.-J., Park, S., & Yoo, W. J. (2017) · ACS Nano · doi:10.1021/acsnano.6b07159 · Cited by 966
Cao, W., Bu, H., Vinet, M., Cao, M., Takagi, S., Hwang, S., Ghani, T., & Banerjee, K. (2023) · Nature · doi:10.1038/s41586-023-06145-x · Cited by 621
Li, S.-L., Tsukagoshi, K., Orgiu, E., & Samorì, P. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00517e · Cited by 549
Self-citation
Metadata
- Authors
- Li, S.-L., Komatsu, K., Nakaharai, S., Lin, Y.-F., Yamamoto, M., Duan, X., & Tsukagoshi, K.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-05
- Volume
- 8
- Issue
- 12
- Pages
- 12836-12842
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2030328290
- Cited by
- 190
- References
- 4
- FWCI
- 7.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.