The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Fabrication and Properties of Microencapsulated Paraffin@SiO2 Phase Change Composite for Thermal Energy Storage
Abstract
In this work, a novel microencapsulated phase change composite of paraffin@SiO 2 was prepared by in situ emulsion interfacial hydrolysis and polycondensation of tetraethyl orthosilicate (TEOS). The as-prepared paraffin@SiO 2 composite was determined by Fourier transformation infrared spectroscope (FT-IR), X-ray diffractometer (XRD), scanning electronic microscope (SEM), and transmission electron microscopy (TEM), respectively. The results showed that the paraffin@SiO 2 composite is composed of quasi-spherical particles with diameters of 200–500 nm. The paraffin is encapsulated in a SiO 2 shell, and there is no chemical reaction between them. The DSC results indicate that the melting temperature and latent heat of the composite are 56.5 °C and 45.5 J/g, respectively. The encapsulation ratio of paraffin was calculated to be 31.7% from the results of the DSC measurements, slightly lower than the loading content (32.5%) of paraffin in the microencapsulated composite from the TGA measurements. The as-prepared paraffin@SiO 2 composite could maintain its phase transition perfectly after 30 melting–freezing cycles, and no leakage of paraffin was observed at 70 °C for 20 min. Moreover, the high heat storage capability and good thermal stability of the composite enable it to be a potential material to store thermal energy in practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Phase change materials for smart textiles – An overview
Mondal, S. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.08.009 · Cited by 1,171
Zhang, H., Wang, X., & Wu, D. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.036 · Cited by 534
Zhang, Z., Zhang, N., Peng, J., Fang, X., Gao, X., & Fang, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.10.014 · Cited by 454
Fang, G., Chen, Z., & Li, H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.054 · Cited by 333
Karaipekli, A., & Sarı, A. (2008) · Renewable Energy · doi:10.1016/j.renene.2008.02.024 · Cited by 309
Zhang, H., & Wang, X. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.02.021 · Cited by 283
Cited by
Review of solid–liquid phase change materials and their encapsulation technologies
Su, W., Darkwa, J., & Kokogiannakis, G. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.044 · Cited by 1,037
Yu, S., Wang, X., & Wu, D. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.10.029 · Cited by 531
Li, Y., Samad, Y. A., Polychronopoulou, K., Alhassan, S. M., & Liao, K. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00839a · Cited by 291
He, F., Wang, X., & Wu, D. (2014) · Energy · doi:10.1016/j.energy.2013.11.088 · Cited by 265
Chai, L., Wang, X., & Wu, D. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.11.006 · Cited by 253
Micro/nano-encapsulated phase change materials (PCMs) as emerging materials for the food industry
Alehosseini, E., & Jafari, S. M. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.07.003 · Cited by 242
From anisotropic graphene aerogels to electron- and photo-driven phase change composites
Li, G., Zhang, X., Wang, J., & Fang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07587h · Cited by 226
Luan, Y., Yang, M., Ma, Q., Qi, Y., Gao, H., Wu, Z., & Wang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01676f · Cited by 190
Jiang, Z., Yang, W., He, F., Xie, C., Fan, J., Wu, J., & Zhang, K. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04834 · Cited by 146
Qian, T., Zhu, S., Wang, H., Li, A., & Fan, B. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05335 · Cited by 102
Toward Tailoring Chemistry of Silica-Based Phase Change Materials for Thermal Energy Storage
Chen, X., Tang, Z., Chang, Y., Gao, H., Cheng, P., Tao, Z., & Lv, J. (2020) · iScience · doi:10.1016/j.isci.2020.101606 · Cited by 47
Metadata
- Authors
- Li, B., Liu, T., Hu, L., Wang, Y., & Gao, L.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-02-18
- Volume
- 1
- Issue
- 3
- Pages
- 374-380
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2329919462
- Cited by
- 317
- References
- 26
- FWCI
- 20.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.