Characterization of Fractions Obtained from Two Industrial Softwood Kraft Lignins
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
With increasing interest in using lignin as an alternative material to petroleum-based chemicals (e.g., in the manufacture of carbon fibers or adhesives), it is becoming important to understand what properties of lignin are required to impart key features in the final product. Commercial lignins are complex, heterogeneous, macromolecular mixtures. To obtain maximum value, lignins will require classification and possibly fractionation or modification to improve properties and enable their utilization in high-value applications. To this end, the physicochemical properties of fractions derived from two industrial softwood Kraft lignins (New Bern Mill, Weyerhaeuser, U.S.A., and Backhammar Mill in Kristinehamn, Sweden) have been determined and compared to previously published data on commercially available Indulin AT lignin from MeadWestvaco.1,2 The fractions were obtained by successive extraction with organic solvents and analyzed using a range of techniques (e.g., DSC, 13 C NMR, 31 P NMR). The results showed that these industrial softwood Kraft lignins varied significantly in both the amounts of the various fractions and in the properties of the analogous fractions. These differences emphasize the issues industry faces in the utilization of industrial lignins for high-value applications where minor inconsistencies between lignin sources could pose major technical challenges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Kraft lignin as feedstock for chemical products: the effects of membrane filtration
Brodin, I., Sjöholm, E., & Gellerstedt, G. (2009) · hfsg · doi:10.1515/hf.2009.049 · Cited by 130
Preparation and characterization of activated carbon from Kraft lignin via KOH activation
Li, X., Xu, Q., Fu, Y., & Guo, Q. (2014) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11794 · Cited by 65
Cited by
Constant, S., Wienk, H. L. J., Frissen, A. E., Peinder, P. D., Boelens, R., van Es, D. S., Grisel, R. J. H., Weckhuysen, B. M., Huijgen, W. J. J., Gosselink, R. J. A., et al. (2016) · Green Chemistry · doi:10.1039/c5gc03043a · Cited by 893
Collins, M. N., Nechifor, M., Tanasă, F., Zănoagă, M., McLoughlin, A., Stróżyk, M. A., Culebras, M., & Teacă, C.-A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.069 · Cited by 486
Yang, W., Fortunati, E., Gao, D., Balestra, G. M., Giovanale, G., He, X., Torre, L., Kenny, J. M., & Puglia, D. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03782 · Cited by 368
Structural Characterization of Lignin and Its Degradation Products with Spectroscopic Methods
Lu, Y., Lu, Y.-C., Hu, H.-Q., Xie, F.-J., Wei, X.-Y., & Fan, X. (2017) · Journal of Spectroscopy · doi:10.1155/2017/8951658 · Cited by 344
Lignin‐Based Thermoplastic Materials
Wang, C., Kelley, S. S., & Venditti, R. A. (2016) · ChemSusChem · doi:10.1002/cssc.201501531 · Cited by 309
Metadata
- Authors
- Dodd, A. P., Kadla, J. F., & Straus, S. K.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-02
- Volume
- 3
- Issue
- 1
- Pages
- 103-110
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2315758575
- Cited by
- 68
- References
- 3
- FWCI
- 3.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.