The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Micromechanical modeling of cracking and failure in brittle rocks
Open accessAbstract
Dynamic micromechanical models are used to analyze crack nucleation and propagation in brittle rock. Models of rock are created by bonding together thousands of individual particles at points of contact. The feasibility of using these bonded particle models to reproduce rock mechanical behavior is explored by comparing model behavior to results from actual laboratory tests on different rock types. The behavior of two granite models are examined in detail to study cracking and failure patterns that occur during compressional loading. Because discontinuum models are being used, the rock models are free to crack and break apart under stress, such that the micromechanics of cracking can be examined. Stress waves are allowed to propagate outward from each crack, and it is shown that these dynamic waves significantly affect the rock behavior. As the peak stress in the modeled rock is approached and many of the bonds are close to breaking, a passing wave from a nearby crack is sufficient to break more bonds. This causes clusters of cracks to be created, and then eventual macroscopic shear failure occurs as these clusters connect to bisect the sample. The failure patterns observed in the granite models are similar to those observed in actual laboratory tests.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Quasi-static fault growth and shear fracture energy in granite
Lockner, D. A., Byerlee, J. D., Kuksenko, V., Ponomarev, A., & Sidorin, A. (1991) · Nature · doi:10.1038/350039a0 · Cited by 1,055
Seismicity Remotely Triggered by the Magnitude 7.3 Landers, California, Earthquake
Hill, D. P., Reasenberg, P. A., Michael, A., Arabaz, W. J., Beroza, G., Brumbaugh, D., Brune, J. N., Castro, R., Davis, S., dePolo, D., et al. (1993) · Science · doi:10.1126/science.260.5114.1617 · Cited by 913
Wong, T., David, C., & Zhu, W. (1997) · Journal of Geophysical Research: Solid Earth · doi:10.1029/96jb03281 · Cited by 897
A note on brittle crack growth in compression
Brace, W. F., & Bombolakis, E. G. (1963) · Journal of Geophysical Research · doi:10.1029/jz068i012p03709 · Cited by 849
The failure of brittle porous solids under compressive stress states
Sammis, C. G., & Ashby, M. F. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90087-8 · Cited by 569
Nucleation and growth of faults in brittle rocks
Reches, Z., & Lockner, D. A. (1994) · Journal of Geophysical Research: Solid Earth · doi:10.1029/94jb00115 · Cited by 526
Continuum models for materials with microstructure
Spencer, A. J. M. (1996) · Engineering Structures · doi:10.1016/0141-0296(96)84815-2 · Cited by 380
Numerical experiments on localization in frictional materials
Cundall, P. A. (1989) · Ingenieur-Archiv · doi:10.1007/bf00538368 · Cited by 350
Morgan, J. K., & Boettcher, M. S. (1999) · Journal of Geophysical Research: Solid Earth · doi:10.1029/1998jb900056 · Cited by 269
A model for non-linear rock deformation under compression due to sub-critical crack growth
Kemeny, J. M. (1991) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(91)91121-7 · Cited by 183
Móra, P., & Place, D. G. (1998) · Journal of Geophysical Research Atmospheres · doi:10.1029/98jb01490 · Cited by 141
Lockner, D. A. (2011) · AGU reference shelf · doi:10.1029/rf003p0127 · Cited by 124
Distinct element modeling of deformation bands in sandstone
Antonellini, M. A., & Pollard, D. D. (1995) · Journal of Structural Geology · doi:10.1016/0191-8141(95)00001-t · Cited by 113
A multiple‐crack model of brittle fracture: 1. Non‐time‐dependent simulations
Lockner, D. A., & Madden, T. R. (1991) · Journal of Geophysical Research Atmospheres · doi:10.1029/91jb01642 · Cited by 80
Cited by
A bonded-particle model for rock
Potyondy, D. O., & Cundall, P. A. (2004) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/j.ijrmms.2004.09.011 · Cited by 5,034
The Mechanics of Earthquakes and Faulting
Scholz, C. H. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316681473 · Cited by 910
The brittle-ductile transition in porous rock: A review
Wong, T.-F., & Baud, P. (2012) · Journal of Structural Geology · doi:10.1016/j.jsg.2012.07.010 · Cited by 657
Zhang, X.-P., & Wong, L. N. Y. (2013) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-012-0323-1 · Cited by 391
Wong, T.-F., Wong, R. H. C., Chau, K. T., & Tang, C. A. (2006) · Mechanics of Materials · doi:10.1016/j.mechmat.2005.12.002 · Cited by 303
Metadata
- Authors
- Hazzard, J. F., Young, R. P., & Maxwell, S. C.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 2000-07-10
- Volume
- 105
- Issue
- B7
- Pages
- 16683-16697
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2016863587
- Cited by
- 285
- References
- 15
- FWCI
- 5.28
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.