Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 158

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Rheology of synthetic anorthite‐diopside aggregates: Implications for ductile shear zones

Dimanov, A., Dresen, G. · 2005 · Journal of Geophysical Research: Solid Earth

Abstract

We investigated the high‐temperature creep strength of fine‐grained anorthite‐diopside rocks at temperatures ranging from 1323 K to 1523 K and at 300 MPa confining pressure in a Paterson‐type gas‐medium deformation apparatus. Flow stress varied between 20 and 450 MPa resulting in strain rates between 6.1 × 10−7 s−1 and 7.5 × 10−4 s−1. Pure diopside and anorthite samples were hot pressed from crushed natural single crystals and glass powders, respectively. Two‐phase samples were produced by hot isostatic pressing of mechanically mixed powders of anorthite glass with 25, 50 and 75 vol % diopside particles. Arithmetic mean grain size of the anorthite matrix is d An ≈ 3.5 μm. Three different ranges of diopside particle size were used: d Di < 25 μm, <35 μm, and <45 μm. Water content of as is samples was about 0.05 ± 0.02 wt % H 2 O, and predried samples contain about 0.004 ± 0.001 wt % H 2 O. At experimental conditions, as is samples are assumed to be water saturated. Water content of predried samples is about 3 times less than that of starting diopside single crystals. The specimens contain about 1 vol % glass located at fluid inclusions and some multiple grain junctions. Two‐grain boundaries examined by high‐resolution transmission electron microscopy did not show amorphous layers to a resolution of 1 nm. At experimental conditions, pure diopside aggregates are about 2–3 orders of magnitude stronger than pure anorthite samples for as is and predried specimens, respectively. In general, strength of the two‐phase aggregates increases with increasing diopside content but remains between isostress and isostrain rate bounds. Aggregate strengths predicted from continuum mechanics models are in good agreement with the experimental data for dilute diopside particle mixtures and high‐volume fractions, when diopside particles form a load‐bearing framework. At low stresses (<100–200 MPa) the stress exponent is n ≈ 1, suggesting diffusion‐controlled creep. At higher stresses, mechanical data and microstructures suggest that samples deformed in the transition region between diffusion‐controlled creep and dislocation creep. For pure anorthite and diopside aggregates deforming in dislocation creep we estimated stress exponents of n ≈ 3 and n ≈ 5.5, respectively. For the two‐phase aggregates, n is between n ≈ 3 and n ≈ 5, depending on diopside content. At low stresses, deformation microstructures indicate load transfer from a weak anorthite matrix to stronger diopside particles. Creep activation energies for pure diopside and anorthite mixtures range from 286 kJ mol−1 for wet anorthite deformed at low stresses to 691 kJ mol−1 for dry diopside deformed at high stresses. Activation energies of two‐phase mixtures are between or close to those of the end‐members. As is samples have significantly lower activation energies than predried samples.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/2004jb003431

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 158

Metadata

Authors
Dimanov, A., & Dresen, G.
Venue
Journal of Geophysical Research: Solid Earth
Published
2005-07
Volume
110
Issue
B7
ISSN
0148-0227 (ISSN-L)
OpenAlex
W2040177578
Cited by
158
References
1
FWCI
4.12
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.