Measurement and prediction of the relationship between capillary pressure, saturation, and interfacial area in a NAPL‐water‐glass bead system
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this work, the constitutive relationship between capillary pressure (Pc), saturation (Sw), and fluid‐fluid interfacial area per volume (IFA) is characterized using computed microtomography for drainage and imbibition experiments consisting of a nonaqueous phase liquid and water. The experimentally measured relationship was compared to a thermodynamic model that relates the area under the Pc − Sw curve to the total IFA, an, and the capillary‐associated IFA, anw. Surfaces were fit to the experimental and modeled Pc − Sw − an and Pc − Sw − anw data in order to characterize the relationship in three dimensions (3D). For the experimental system, it was shown that the Pc − Sw − an relationship does not exhibit hysteresis. The model is found to provide a reasonable approximation of the magnitude of the 3D surfaces for an and anw, with a mean absolute percent error of 26% and 15%, respectively. The relatively high mean absolute percent errors are primarily the result of discrepancies observed at the wetting‐ and nonwetting‐phase residual saturation values. Differences in the shapes of the surfaces are noted, particularly in the curvature (arising from the addition of scanning curves and presence of an − Sw hysteresis in the predicted results) and endpoints (particularly the inherent nature of thermodynamic models to predict significant anw associated with residual nonwetting‐phase saturation). Overall, the thermodynamic model is shown to be a practical, inexpensive tool for predicting the Pc − Sw − an and Pc − Sw − anw surfaces from Pc − Sw data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, H., Rao, P. S. C., & Annable, M. D. (1997) · Water Resources Research · doi:10.1029/97wr02227 · Cited by 177 · cited 1×
“The shape and magnitude of this curve is consistent with other experimentally measured curves [e.g., Kim and Rao, 1997; Anwar et al., 2000; Costanza‐Robinson et al., 2008] for similar porous media.”
ResultA method for determining air–water interfacial area in variably saturated porous media
Faisal Anwar, A. H. M., Bettahar, M., & Matsubayashi, U. (2000) · Journal of Contaminant Hydrology · doi:10.1016/s0169-7722(99)00103-5 · Cited by 93
Cited by
Wildenschild, D., & Sheppard, A. P. (2013) · Advances in Water Resources · doi:10.1016/j.advwatres.2012.07.018 · Cited by 1,239
Self-citationPredicting colloid transport through saturated porous media: A critical review
Molnar, I. L., Johnson, W. P., Gerhard, J. I., Willson, C. S., & O'Carroll, D. M. (2015) · Water Resources Research · doi:10.1002/2015wr017318 · Cited by 304
Self-citationSima, M. W., & Jaffé, P. R. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143793 · Cited by 242
Armstrong, R. T., McClure, J. E., Robins, V., Liu, Z., Arns, C. H., Schlüter, S., & Berg, S. (2019) · Transport in Porous Media · doi:10.1007/s11242-018-1201-4 · Cited by 203
“As seen in laboratory experiments, it is also known that a single saturation can result in various possible capillary pressures (Porter et al. 2010; Schaap et al. 2007; Karadimitriou et al. 2014).”
BackgroundCostanza‐Robinson, M. S., Estabrook, B. D., & Fouhey, D. F. (2011) · Water Resources Research · doi:10.1029/2010wr009655 · Cited by 202
“…"g criterion implemented here corresponded well to our own visual plateau assessments and to similar literature assessments [e.g., Reeves and Celia, 1996; Clausnitzer and Hopmans, 1999; Zhang et al., 2000; Culligan et al., 2004; Razavi et al., 2007; Narter and Brusseau, 2010; Porter et al., 2010].”
BackgroundResultInfluential
Metadata
- Authors
- Porter, M. L., Wildenschild, D., Grant, G., & Gerhard, J. I.
- Venue
- Water Resources Research
- Publisher
- American Geophysical Union (AGU)
- Published
- 2010-08
- Volume
- 46
- Issue
- 8
- ISSN
- 0043-1397 (ISSN-L)
- 1944-7973
- OpenAlex
- W2152172286
- Cited by
- 150
- References
- 2
- FWCI
- 19.28
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Measurement and prediction of the relationship between capillary pressure, saturation, and interfacial area in a NAPL‐water‐glass bead system. https://app.cochat.ai/papers/10.1029/2009wr007786
- The paper
- Porter, M. L., Wildenschild, D., Grant, G., & Gerhard, J. I. (2010). Measurement and prediction of the relationship between capillary pressure, saturation, and interfacial area in a NAPL‐water‐glass bead system. Water Resources Research. https://doi.org/10.1029/2009wr007786
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.