CoChat

Efficacy of Climate Forcings in PDRMIP Models

Open access

The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.

Abstract

Abstract Quantifying the efficacy of different climate forcings is important for understanding the real‐world climate sensitivity. This study presents a systematic multimodel analysis of different climate driver efficacies using simulations from the Precipitation Driver and Response Model Intercomparison Project (PDRMIP). Efficacies calculated from instantaneous radiative forcing deviate considerably from unity across forcing agents and models. Effective radiative forcing (ERF) is a better predictor of global mean near‐surface air temperature (GSAT) change. Efficacies are closest to one when ERF is computed using fixed sea surface temperature experiments and adjusted for land surface temperature changes using radiative kernels. Multimodel mean efficacies based on ERF are close to one for global perturbations of methane, sulfate, black carbon, and insolation, but there is notable intermodel spread. We do not find robust evidence that the geographic location of sulfate aerosol affects its efficacy. GSAT is found to respond more slowly to aerosol forcing than CO2 in the early stages of simulations. Despite these differences, we find that there is no evidence for an efficacy effect on historical GSAT trend estimates based on simulations with an impulse response model, nor on the resulting estimates of climate sensitivity derived from the historical period. However, the considerable intermodel spread in the computed efficacies means that we cannot rule out an efficacy‐induced bias of ±0.4 K in equilibrium climate sensitivity to CO2 doubling when estimated using the historical GSAT trend.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/2019jd030581

Cites

72 of 72 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 IRF trop, IRF toa, RF strat, ERF reg, ERF sst, and ERF ssta for the five core PDRMIP forcings. Colored diamonds denote the multimodel mean, and error bars show the intermodel standard deviation. Individual model results are represented by gray diamonds. Hollow gray diamonds denote models which perturbed emissions rather than concentrations in the aerosol experiments. One model (HadGEM3) is off the bottom of the scale for 5×SO4.
Figure 1 IRF trop, IRF toa, RF strat, ERF reg, ERF sst, and ERF ssta for the five core PDRMIP forcings. Colored diamonds denote the multimodel mean, and error bars show the intermodel standard deviation. Individual model results are represented by gray diamonds. Hollow gray diamonds denote models which perturbed emissions rather than concentrations in the aerosol experiments. One model (HadGEM3) is off the bottom of the scale for 5×SO4.CC BY · PubMed Central
Figure 2 Multimodel mean ERF sst distributions of core PDRMIP experiments. Hatching shows where the multimodel mean is less than the intermodel standard deviation.
Figure 2 Multimodel mean ERF sst distributions of core PDRMIP experiments. Hatching shows where the multimodel mean is less than the intermodel standard deviation.CC BY · PubMed Central
Figure 3 Global mean E irf_trop, E irf_toa, E rf_strat, E erf_reg, E erf_sst, E erf_ssta, and E α calculated for PDRMIP forcing experiments. Colored diamonds denote the multimodel mean, and error bars show the intermodel standard deviation. Individual model results are represented by gray diamonds. Hollow gray diamonds denote models which perturbed emissions rather than concentrations in the aerosol experiments. One model result lies off the top of the scale for 5×SO4 E irf_trop (MIROC‐SPRINTARS) and 10×BC E erf_r (HadGEM3).
Figure 3 Global mean E irf_trop, E irf_toa, E rf_strat, E erf_reg, E erf_sst, E erf_ssta, and E α calculated for PDRMIP forcing experiments. Colored diamonds denote the multimodel mean, and error bars show the intermodel standard deviation. Individual model results are represented by gray diamonds. Hollow gray diamonds denote models which perturbed emissions rather than concentrations in the aerosol experiments. One model result lies off the top of the scale for 5×SO4 E irf_trop (MIROC‐SPRINTARS) and 10×BC E erf_r (HadGEM3).CC BY · PubMed Central
Figure 4 E erf_sst estimates for each PDRMIP model. Error bars denote the 5–95% confidence interval based on the interannual variability of the control run. Models which perturbed emissions rather than concentrations in the aerosol experiments are shown in red. CESM1‐CAM4 and ECHAM‐HAM are run with a slab ocean.
Figure 4 E erf_sst estimates for each PDRMIP model. Error bars denote the 5–95% confidence interval based on the interannual variability of the control run. Models which perturbed emissions rather than concentrations in the aerosol experiments are shown in red. CESM1‐CAM4 and ECHAM‐HAM are run with a slab ocean.CC BY · PubMed Central
Figure 5 Multimodel mean surface temperature response for core PDRMIP forcing experiments (years 81–100 of coupled runs), normalized by the GSAT response. Hatching shows where the multimodel mean is less than the intermodel standard deviation.
Figure 5 Multimodel mean surface temperature response for core PDRMIP forcing experiments (years 81–100 of coupled runs), normalized by the GSAT response. Hatching shows where the multimodel mean is less than the intermodel standard deviation.CC BY · PubMed Central
Figure 6 Multimodel mean difference in normalized surface temperature responses for each of the core PDRMIP perturbation experiments relative to temperature response to 2×CO2. Temperature responses are normalized by ERF sst. Hatching shows where the multimodel mean is less than the intermodel standard deviation.
Figure 6 Multimodel mean difference in normalized surface temperature responses for each of the core PDRMIP perturbation experiments relative to temperature response to 2×CO2. Temperature responses are normalized by ERF sst. Hatching shows where the multimodel mean is less than the intermodel standard deviation.CC BY · PubMed Central
Figure 7 PDRMIP multimodel zonal mean temperature response to forcing normalized by GSAT change. The gray contours show the multimodel mean zonal temperature climatology. The stippling shows where the MMM difference is less than ±1 standard deviation of the intermodel spread.
Figure 7 PDRMIP multimodel zonal mean temperature response to forcing normalized by GSAT change. The gray contours show the multimodel mean zonal temperature climatology. The stippling shows where the MMM difference is less than ±1 standard deviation of the intermodel spread.CC BY · PubMed Central
Figure 8 ERF sst (top) and E erf_sst (bottom) of each model for global and regional forcing experiments performed by a subset of PDRMIP models. The error bars denote the 5–95% confidence interval based on the interannual variability of the control run. Models which perturbed emissions rather than concentrations in the aerosol experiments are shown in red. CESM1‐CAM4 and ECHAM‐HAM are run with a slab ocean.
Figure 8 ERF sst (top) and E erf_sst (bottom) of each model for global and regional forcing experiments performed by a subset of PDRMIP models. The error bars denote the 5–95% confidence interval based on the interannual variability of the control run. Models which perturbed emissions rather than concentrations in the aerosol experiments are shown in red. CESM1‐CAM4 and ECHAM‐HAM are run with a slab ocean.CC BY · PubMed Central
Figure 9 Multimodel mean ERF sst for (a) 10×SO4asia and (b) 10×SO4eur. Multimodel mean surface temperature response normalized by the GSAT response for (c) 10×SO4asia and (d) 10×SO4eur. Multimodel mean difference in normalized surface temperature response relative to 2×CO2 for (e) 10×SO4asia and (f) 10×SO4eur. The temperature response is normalized by ERF sst.
Figure 9 Multimodel mean ERF sst for (a) 10×SO4asia and (b) 10×SO4eur. Multimodel mean surface temperature response normalized by the GSAT response for (c) 10×SO4asia and (d) 10×SO4eur. Multimodel mean difference in normalized surface temperature response relative to 2×CO2 for (e) 10×SO4asia and (f) 10×SO4eur. The temperature response is normalized by ERF sst.CC BY · PubMed Central
Figure 10 Panel (a) shows the multimodel mean GSAT response curves as a function of time for 2×CO2, 5×SO4, and 2%SOL normalized by ERF sst. The intermodel standard deviation is shown in gray. Panel (b) shows the multimodel mean historical GSAT change computed using the impulse response model described in section 2.5 not accounting for efficacies (red) and accounting for efficacies (black dotted). The difference is shown in blue. Individual model results not accounting for efficacies are shown by dark gray lines GSAT and accounting for efficacies by light gray lines. Panel (c) shows the same as panel (b) for the period 1915–2014 and therefore includes no extrapolation of the response curves beyond the 100 years of PDRMIP data.
Figure 10 Panel (a) shows the multimodel mean GSAT response curves as a function of time for 2×CO2, 5×SO4, and 2%SOL normalized by ERF sst. The intermodel standard deviation is shown in gray. Panel (b) shows the multimodel mean historical GSAT change computed using the impulse response model described in section 2.5 not accounting for efficacies (red) and accounting for efficacies (black dotted). The difference is shown in blue. Individual model results not accounting for efficacies are shown by dark gray lines GSAT and accounting for efficacies by light gray lines. Panel (c) shows the same as panel (b) for the period 1915–2014 and therefore includes no extrapolation of the response curves beyond the 100 years of PDRMIP data.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 72 references

Cited by

Items 101–135 of 135

Metadata

Authors
Richardson, T. B., Forster, P. M., Smith, C. J., Maycock, A. C., Wood, T., Andrews, T., Boucher, O., Faluvegi, G., Fläschner, D., Hodnebrog, Ø., Kasoar, M., Kirkevåg, A., Lamarque, J. ‐., Mülmenstädt, J., Myhre, G., Olivié, D., Portmann, R. W., Samset, B. H., Shawki, D., Shindell, D., Stier, P., Takemura, T., Voulgarakis, A., & Watson‐Parris, D.
Affiliations
  • University of Leeds (GB)
  • Met Office (GB)
  • Centre National de la Recherche Scientifique (FR)
  • Goddard Institute for Space Studies (US)
  • Max Planck Institute for Meteorology (DE)
  • CICERO Center for International Climate Research (NO)
  • Imperial College London (GB)
  • Norwegian Meteorological Institute (NO)
  • NSF National Center for Atmospheric Research (US)
  • Leipzig University (DE)
  • National Oceanic and Atmospheric Administration (US)
  • Duke University (US)
  • University of Oxford (GB)
  • Kyushu University (JP)
Corresponding author
Forster, P. M.
Venue
Journal of Geophysical Research Atmospheres
Published
2019-12-11
Volume
124
Issue
23
Pages
12824-12844
ISSN
  • 0148-0227 (ISSN-L)
  • 2169-897X
  • 2169-8996
OpenAlex
W2990482070
Cited by
115
References
70
Citations by year
2026: 4 · 2025: 15 · 2024: 19 · 2023: 17 · 2022: 18 · 2021: 19 · 2020: 12 · 2019: 3
FWCI
6.69
Type
journal article
Language
en
Open access
Locations
  • Journal of Geophysical Research Atmospheres (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
  • NOAA Institutional Repository (submittedVersion)
  • MPG.PuRe (Max Planck Society) (submittedVersion, cc-by)
  • Spiral (Imperial College London) (submittedVersion, other-oa)
  • VUBIR (Vrije Universiteit Brussel) (submittedVersion)
Funders
  • Natural Environment Research Council (NE/N006038/1, NE/P013406/1, NE/L01355X/1, NE/J022624/1, NE/K500872/1, NE/M018199/1)
  • European Research Council (724602)
  • Norges Forskningsråd (ns2345k, nn2345k, 207711/E10, 229771, 229778)
  • Ministry of Environment (S‐12‐3)
  • National Institute for Environmental Studies
  • Grand Équipement National De Calcul Intensif
Topics
  • Physical Sciences › Environmental Science › Global and Planetary Change › Climate variability and models
  • Physical Sciences › Environmental Science › Global and Planetary Change › Atmospheric aerosols and clouds
  • Physical Sciences › Environmental Science › Global and Planetary Change › Climate Change and Geoengineering
Keywords
effective radiative forcing, PDRMIP, equilibrium climate sensitivity, radiative kernels, sulfate aerosols, black carbon, methane, solar irradiation, CO2 forcing, impulse response model, inter-model spread

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.